DESCRIPTION
Medina no. 573
Medina no. 573 is a loyal, welcoming blue. Like the fresh and vibrant welcome of the walled city after the scorching heat of the desert. Go for a real Moroccan color combination with Masala Chai no. 31 and Strong Garlic no. 92.
LAB Floor Coating
A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnate
LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )
LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.
The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.
How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!
Medina no. 573
Medina no. 573 is a loyal, welcoming blue. Like the fresh and vibrant welcome of the walled city after the scorching heat of the desert. Go for a real Moroccan color combination with Masala Chai no. 31 and Strong Garlic no. 92.
LAB Floor Coating
A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnate
LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )
LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.
The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.
How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!