Army Green No. 211

Sober but intense. Army Green no. 211 looks great in an industrial loft with brick and steel doors. Soften Army Green no. 211 with the contrasting Saint-Tropez no. 460 and Jasmin Blend no. 467.

LAB Bathroom coating

LAB Bathroom Coating is an easy-to-use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you don't want tiles. But can also go over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnate, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnate

LAB Bathroom Coating Impregnate fixes powdery surfaces and quickly seals highly absorbent surfaces. This makes the covering system of LAB Bathroom Coating easier and smoother to apply and creates a good bond with the substrate.

Is the surface non-absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnate in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer gives you excellent adhesion and color coverage. For absorbent surfaces, make sure that you first treat the bathroom with LAB Bathroom Coating Impregnator. If the surface is not absorbent (such as tiles and already painted or coated bathrooms), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer immediately. For gypsum-bound stucco, plaster and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregneer. After you have applied Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent surfaces rather need 2 layers for a good layer thickness and coverage. Bright and very light colors cover less well. Two layers are also advisable here.

LAB Bathroom coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnate (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet cell of the bathroom.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this with each other and then divide by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnator (calculated with a consumption of 8 m² per kilo) for 1 layer.

Order the complete and reduced price Bathroom coating processing package with these products. Then you can be sure that you have all the tools for the job at home!