✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Nude Cashmere no. 312

Silky neutral with a light pink tint. Nude Cashmere no. 312 is slightly sensual but full of refined allure. Due to the pink undertone in Nude Cashmere no. 312, it can be combined well with green tones, such as Limited Jade no. 479 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Terra Pink no. 102

Terra Pink no. 102 is a warm, greyed old pink shade with a light earthy undertone. This colour feels mature but retains a certain playfulness. Terra Pink no. 102 looks beautiful with the also warm, greyed, but slightly lighter Madonna no. 90 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Coffee Addict no. 214

A neutral, classic and warm sand shade with a hint of coffee. Coffee Addict no. 214 is an addictive grey-brown that also works very well in LAB Cementum or LAB Chalk! Go for a cloud of milk in your coffee and combine Coffee Addict no. 214 stylishly with Cotton Cloud no. 223 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Saint-Tropez no. 460

Put on your big sunglasses and go for a stroll! You can bring that wonderful feeling into your home if you choose Saint-Tropez no. 460. A colour to subtly show off! The red undertone of Saint-Tropez no. 460 goes very well with the complementary, yet soft greens of Zanzibar no. 852 and Whispering Woods no. 62 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Petit Macaron no. 916

Petit Macaron no. 916 is a layered neutral with fraise and pêche undertones. This makes this shade work well in a composition with deep pink hues and terracotta timbres. For a romantic combination, pair it with Tout no. 530 and Madonna no. 90 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Prefer Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Wallprim Pro | Old Flax

Pure & Original is a Dutch paint brand that offers endless possibilities with more than 180 colours, 5 types of preparatory products, 10 types of paint and 3 types of finishing specials.

All Pure & Original paints are colored with natural and organic pigments, which originate from nature and contribute to the sustainability and quality requirements. Vestingh Paint • Craft • Lifestyle is an exclusive Star Dealer of Pure & Original . We have a mixing machine at our disposal with which we can mix all colors and types of paint.

WallPrim Pro

A water-dilutable wall primer for indoors. WallPrim Pro is available in all Pure & Original colours and has a very matt appearance. Applicable to plastered walls, (non-woven) wallpaper, painted walls, plasterboard, ceiling, wooden panels, rough walls and plasterwork.
Available in 1 liter, 2.5 liter and 5 liter cans. Consumption per liter is 8-10 m². View here the Pure & Original WallPrim Pro product advice.

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original colour chart

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Merlot Mania No. 123

A dark, classic and chic wine color with lots of gray tones and a touch of blue. Merlot Mania no. 123 is a warm, rich, lush and powerful color. For the real connoisseur! Beau Belle no. 898 works well as a light base with Merlot Mania no. 123. Terra Pink no. 102 is a beautiful, striking intermediate color.

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Prefer Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Wallprim Pro | Coffee Cream

Pure & Original is a Dutch paint brand that offers endless possibilities with more than 180 colours, 5 types of preparatory products, 10 types of paint and 3 types of finishing specials.

All Pure & Original paints are colored with natural and organic pigments, which originate from nature and contribute to the sustainability and quality requirements. Vestingh Paint • Craft • Lifestyle is an exclusive Star Dealer of Pure & Original . We have a mixing machine at our disposal with which we can mix all colors and types of paint.

WallPrim Pro

A water-dilutable wall primer for indoors. WallPrim Pro is available in all Pure & Original colours and has a very matt appearance. Applicable to plastered walls, (non-woven) wallpaper, painted walls, plasterboard, ceiling, wooden panels, rough walls and plasterwork.
Available in 1 liter, 2.5 liter and 5 liter cans. Consumption per liter is 8-10 m². View here the Pure & Original WallPrim Pro product advice.

Photography: Charis de Fauw

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original colour chart

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Sensational Sand no. 290

Beachy chic. Sensational Sand no. 290 is a casual sand color that is both laidback and exclusive in character. That is why this natural shade combines in many palettes and fits beautifully in different interior styles. Sensational Sand no. 290 works well with the deep, complementary blue color Gracious Blue no. 792 . Sensational in combination with brass accents.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Mrs. Wool no. 108

Mrs. Wool no. 108 is a warm, generous white with yellow pigments. This natural colour tone enhances the richness of its opponents. The off-white is woolly and gives a beautiful texture. Mrs. Wool no. 108 combines beautifully with sand tones, such as Sensational Sand no. 290 and Velvet Fudge no. 380 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

All no. 530

Tout no. 530 has it all. This brown-pink looks great in various interior styles. From chic to bohemian. From design to retro. Get the most out of Tout no. 530 and make it extra elegant with the gray shade Voilà Paris no. 651 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Terracotta Warrior no. 42

Terracotta Warrior no. 42 is an earthy, burnt orange shade. A charismatic color that creates a warming natural environment. This earthy tone is homely on the one hand and strengthens the bond with nature on the other. The combative Terracotta Warrior no. 42 combines nicely with the soft neutrals Gray Clay no. 74 and Frosted Sand no. 374 .

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Prefer Same Day Delivery ?
✓ Available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Wallprim Pro | Soft Taupe

Pure & Original is a Dutch paint brand that has endless possibilities with more than 180 colours, 5 types of preparatory products, 10 types of paint and 3 types of finishing specials.

All Pure & Original paints are colored with natural and organic pigments, which originate in nature and contribute to the sustainability and quality requirements. Vestingh Paint • Craft • Lifestyle is the exclusive Star Dealer of Pure & Original . We have access to a mixing machine with which we can mix all colors and paint types.

Wall Prim Pro

A water dilutable wall primer for indoor use. WallPrim Pro is available in all Pure & Original colors and has a very matte appearance. Can be used on plastered walls, (non-woven) wallpaper, painted walls, plasterboard, ceiling, wooden panels, rough walls and plaster.
Available in 1 liter, 2.5 liter and 5 liter cans. Consumption per liter is 8-10 m². Look at here the Pure & Original WallPrim Pro product advice.

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original color chart

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Crystal Brut no. 307

Softly bubbling white hue. Crystal Brut no. 307 exudes refined luxury and elegance. The ideal white that is a refined choice due to its rosé undertone. Drink your Crystal Brut no. 307 in Saint-Tropez no. 460 and complete your opulent trip with Ibiza Rush no. 966 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Zanzibar no. 852

Some greens almost fall under the neutrals. Zanzibar no. 852 is a good example of that. It is a journey in paradise. From waving palm trees, pearly white beaches and sunsets to the idyllic green interior. Zanzibar no. 852 can be nicely in a palette with Magnum no. 708 and Dark Taupe no. 196 , but also harmoniously matches The Grand no. 325 and Hero's Time no. 138 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Oriental Ecru no. 434

Oriental Ecru no. 434 is a versatile color due to its neutral base. Warm and exotic. If you want to explore this oriental feeling further, use this color in LAB Cementum. Cotton Cloud no. 223 and Gorilla Glam no. 386 have a grayish yellow undertone, just like Oriental Ecru no. 434. That's why they go beautifully together!

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Smoking Grass no. 23

Smoking Grass no. 23 is a strongly muted green. Due to its greying, this shade is reassuring and provides relaxation. Gold or brass and weathered wood look beautiful with this colour tone. Combine Smoking Grass no. 23 with AMS Leaves no. 602 and trip on the beautiful interplay of the green shades.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Scented Cumin no. 34

A rich shade inspired by the colour of ground cumin. The pure yellow base of Scented Cumin no. 34 is complemented with black to create an interesting colour that is easy to match with many shades. For a tone-on-tone colour palette, choose Oriental Ecru no. 434 or go for a fresh combination with Nude Cashmere no. 312 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Night Sky no. 101

Dark night grey with a neutral undertone. Night Sky no. 101 is a deep colour shade with which you can make a broad gesture or place a beautiful accent. Are you looking for a black accent but is Pure Black no. 50 too hard? Then the off-black Night Sky no. 101 is a good alternative.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Whispering Woods no. 62

This green is literally whisper-soft. Like nature in autumn, when the bright colours of the green have softened. Whispering Woods no. 62 is subdued by a beautiful greying and warm by the addition of light yellow. Sublime with various types of wood and soft natural nuances, such as Just Jimmy no. 559 and White Wood no. 201 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!