✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Farrow & Ball | Wall & Ceiling Primer & Undercoat

Farrow & Ball Primer and Undercoats are specially formulated with the same natural ingredients and rich pigments as our topcoats. For long lasting results and to achieve a perfect, even finish, you need to ensure you use the correct primer and undercoat. Our Primer & Undercoat recommendations will help you achieve a perfect Farrow & Ball finish, but if you would like some further guidance, please feel free to contact our team.

Farrow & Ball is a high-quality paint brand, developed and produced in England.

All Farrow & Ball Primer & Undercoats are water-based, low-odour and quick-drying.

WALL & CEILING PRIMER & UNDERCOAT
Designed for use under Estate Emulsion and Modern Emulsion.
Consumption 2.5 litres approx. 32 m² and 5 litres approx. 60 m².

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Mushroom no. 287

Mushroom no. 287 is a warm earth tone with a mix of beige, gray and cream. For a calm, natural atmosphere that fits in a versatile interior. Do you paint the walls with Mushroom no. 287? Then Frosted Sand no. 374 is the perfect color for your ceiling.

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Frosted Sand no. 374

Frosted Sand no. 374 is a soft, warm and light shade consisting of a delicate interplay of beige, grey and cream. A refined white that brings a sense of subtlety. Frosted Sand no. 374 is a frequently used combination with Mushroom no. 287 . But this light shade also combines beautifully with, for example , Diamond Dust no. 232 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

White Truffle no. 644

A light beige with a brown-grey undertone. White Truffle no. 644 is the ideal choice for those who find Mushroom no. 287 a little too dark. It is a refined interpretation of this versatile colour. To give this typical greige more depth, combine White Truffle no. 644 very chicly with Harbour no. 968 and Night Sky no. 101 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Prefer Same Day Delivery ?
✓ Available from stock
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pure & Original | WallFix

Recommended for powdery surfaces for good adhesion. Applicable to painted walls, newly plastered walls, old Kalei layers, cellular concrete, plasterboard, plaster blocks, lime plaster and all other mineral surfaces.

Available in 1 litre and 2.5 litre cans. Consumption per litre is 15-20 m². View the Pure & Original Wallfix product advice here .

Add painting supplies to your order?

Easily order your painting supplies here . From tape, rollers and brushes to sanding materials and more. We have also put together complete processing packages for a greatly reduced rate, provided with all the painting supplies you need for your painting project. Need advice? Feel free to contact us.

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original colour chart

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Prefer Same Day Delivery ?
✓ Available from stock
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pure & Original | Fresco Special Fix

For walls with a mineral surface, such as where lime paint or Kalei has been applied before. It is important to fix these first with the Fresco Special Fix, so that new paint adheres well.

Available in 1 liter and 5 liter cans. Consumption per liter is 15-20 m². View the Pure & Original Fresco Special Fix product advice here .

Add painting supplies to your order?

Easily order your painting supplies here . From tape, rollers and brushes to sanding materials and more. We have also put together complete processing packages for a greatly reduced rate, provided with all the painting supplies you need for your painting project. Need advice? Feel free to contact us.

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original colour chart

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?*
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Own choice of color

Check the correct size. Then, when checking out, you can write down your desired color name or color number (such as NCS or RAL) in the notes.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Ibiza Rush no. 966

Who's going on a trip with Ibiza Rush no. 966? This color breathes Mediterranean warmth. Beautiful in a natural boho interior. Also include Golden Leaf no. 752 and Crystal Brut no. 307 in the palette and complete your boho look with Ibiza Rush no. 966.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Spider Mum no. 310

Spider Mum no. 310 is a frivolous flower in white and other colours. Just as versatile as this warm white shade with beige-grey nuances. Spider Mum no. 310 goes well with the blue Gracious Blue no. 792 , the pink Tout no. 530 or the green Moss no. 41 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Nigiri no. 286

Delicious and very refined. Nigiri no. 286 is a soft salmon color that subtly adds flavor to your interior. This shade can be used very well as the striking color in a Japandi interior style. Nigiri no. 286 blends perfectly in your interior with Saint-Tropez no. 460 and Ibiza Rush no. 966 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Full White no. 253

Full White no. 253 is a pure white shade that is the perfect backdrop for both a calm and lively interior style. Of all shades, pure white is the most sensitive to changes in light and shadow. This white increases the effect of daylight and lets it reflect in the space. With Full White no. 253 you can increase the contrast in your color palette. It is a fresh counterpart to almost any color shade.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Amaze no. 535

Amaze No. 535 contains the same pigments as the warm Mushroom No. 287 , but then a little more. A deeper earth tone with a wide range of possibilities. Add Limited Jade No. 479 and Soho No. 452 for an amazing combination.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Madonna no. 90

Madonna no. 90 is a comfortable warm colour that is very versatile due to its low saturation and greyed character. Iconic and at the same time virginal pink. Express yourself and choose Madonna no. 90. Due to the touch of yellow, this shade goes well with Nigiri no. 286 . Enhance the pink undertone with Diamond Dust no. 232 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Silk Dreamer no. 194

Silk Dreamer no. 194 is refined and elegant in all its simplicity. With this dreamy shade you create a calm and silky atmosphere with a personality all of its own. Silk Dreamer no. 194 is a versatile white shade and therefore a perfect base for both warm and cool color palettes.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Fluffy Cheetah No. 255

Fluffy Cheetah no. 255 is soft and cuddly. A delicate neutral that hugs the space. Go wild and expand your color palette with beautiful brown natural tones, for example. Golden Leaf no. 752 and Magnum no. 708 go perfectly with the soft Fluffy Cheetah no. 255.

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Strong Garlic no. 92

This neutral-but-not-white shade will add a soft glow to your walls. Strong Garlic No. 92 looks great with warm tones like orange and red, but is also a perfect companion for blue and green tones. The shade of Strong Garlic No. 92 is a match with Zen Garden No. 680 and Zanzibar No. 852 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Arabic Desert no. 710

Vibrant sandstone colour. Arabic Desert no. 710 radiates warmth and an oasis of tranquility. Beautiful if you want to experience the atmosphere of Marrakech at home. Enhance the effect by executing this colour in LAB Cementum. Complete the Arabic picture with Nigiri no. 286 and Limited Jade no. 479 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Golden Leaf no. 752

A low sun on a discolouring canopy of leaves. Golden Leaf no. 752 is the colour of autumn that symbolises strength and introspection. A beautiful shade of brown that has not yet lost its vitality. Give more depth to Golden Leaf no. 752 with Magnum no. 708 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Prefer Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Wallprim Pro | Old Linen

Pure & Original is a Dutch paint brand that offers endless possibilities with more than 180 colours, 5 types of preparatory products, 10 types of paint and 3 types of finishing specials.

All Pure & Original paints are colored with natural and organic pigments, which originate from nature and contribute to the sustainability and quality requirements. Vestingh Paint • Craft • Lifestyle is an exclusive Star Dealer of Pure & Original . We have a mixing machine at our disposal with which we can mix all colors and types of paint.

WallPrim Pro

A water-dilutable wall primer for indoors. WallPrim Pro is available in all Pure & Original colours and has a very matt appearance. Applicable to plastered walls, (non-woven) wallpaper, painted walls, plasterboard, ceiling, wooden panels, rough walls and plasterwork.
Available in 1 liter, 2.5 liter and 5 liter cans. Consumption per liter is 8-10 m². View here the Pure & Original WallPrim Pro product advice.

Want to see more from Pure & Original?

• Pure & Original colours
• Pure & Original colour chart

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Jasmin Blend no. 467

Modest, simple and pure. That characterizes Jasmin Blend no. 467. A soothing mix of gray and classic beige. Enhance the pink undertone of Jasmin Blend no. 467 and match it with Madonna no. 90 and Diamond Dust no. 232 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!