Floor coating

The effect of a cast floor, without high costs? VESTINGH Floor Coating has been developed to create the effect of a cast floor, without having to install a real cast floor.

Cast floors are often very expensive and we have come up with something for that! VESTINGH Floor Coating is very strong, wear and scrub resistant, has a matt appearance, does not yellow and is easy to apply yourself.

NB! You can still see any seams and other irregularities in the floor! The floor coating is available in all unique LAB COLORS and almost any other colour. Read more about VESTINGH Floor Coating at the bottom of this page.

Quick view
LAB Floor Coating | BERLIN SUMMER NO. 433
LAB Floor Coating | BERLIN SUMMER NO. 433
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | BEE BALM NO. 538
LAB Floor Coating | BEE BALM NO. 538
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | BEAU BELLE NO. 898
LAB Floor Coating | BEAU BELLE NO. 898
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | BEACH WALK NO. 415
LAB Floor Coating | BEACH WALK NO. 415
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | Avocado Club no. 840
LAB Floor Coating | Avocado Club no. 840
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | Asian Sunrise no. 978
LAB Floor Coating | Asian Sunrise no. 978
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | ARABIC DESERT NO. 710
LAB Floor Coating | ARABIC DESERT NO. 710
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | AMAZE NO. 535
LAB Floor Coating | AMAZE NO. 535
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | SOFT FERN NO. 314
LAB Floor Coating | SOFT FERN NO. 314
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | TERRA PINK NO. 102
LAB Floor Coating | TERRA PINK NO. 102
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | QUIET BLUSH NO. 67
LAB Floor Coating | QUIET BLUSH NO. 67
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | STRONG GARLIC NO. 92
LAB Floor Coating | STRONG GARLIC NO. 92
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | SOFT BLACK NO. 282
LAB Floor Coating | SOFT BLACK NO. 282
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | PURE BLACK NO. 50
LAB Floor Coating | PURE BLACK NO. 50
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | NIGHT BLUE NO. 273
LAB Floor Coating | NIGHT BLUE NO. 273
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | SMOKING GRASS NO. 23
LAB Floor Coating | SMOKING GRASS NO. 23
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | HERO'S TIME NO. 138
LAB Floor Coating | HERO'S TIME NO. 138
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | BROWN WOOD NO. 222
LAB Floor Coating | BROWN WOOD NO. 222
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | CANVAS NO. 144
LAB Floor Coating | CANVAS NO. 144
LAB PAINT
from €66.00
Quick view
LAB Floor Coating | SENSATIONAL SAND NO. 290
LAB Floor Coating | SENSATIONAL SAND NO. 290
LAB PAINT
from €66.00
Bekijk meer producten

LAB Floor coating opaque and transparent

PAINT YOUR HOUSE, COLOR THE WORLD

We have floor coating in two different variants: LAB Floor Coating Transparent and the opaque LAB Floor Coating, which is available in almost every color imaginable. Both are easy to apply to various surfaces, have a matt appearance that does not yellow and are very strong, wear and scrub resistant.

The LAB Floor Coating system in the opaque version, with which you can easily apply a look-a-like cast floor without high costs, consists of four different products, namely: LAB Floor Coating Impregneer, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional). The transparent system has two steps: LAB Floor Coating Primer Transparent and LAB Floor Coating Transparent.

It is important to read the product advice carefully before application!

Make use of the complete floor coating processing package at a reduced price. This way you can be sure that you have everything you need for your project.

LAB Floor Coating | BERLIN SUMMER NO. 433
LAB Floor Coating | BERLIN SUMMER NO. 433
LAB PAINT

LAB Floor Coating | BERLIN SUMMER NO. 433

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Berlin Summer no. 433

Berlin Summer no. 433 is like the sunny glow that hangs over the metropolis. It is a light, warm sand color. Beautiful to execute in LAB Chalk and emphasize the sandy and powdery character even more. Increase the summer feeling with Ibiza Rush no. 966 or make Berlin Summer no. 433 completely chic with Marie no. 114 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | BEE BALM NO. 538
LAB Floor Coating | BEE BALM NO. 538
LAB PAINT

LAB Floor Coating | BEE BALM NO. 538

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Bee Balm no. 538

Bee Balm no. 538 has a tender and floral character. A pale pink, powdery shade with a white-gold personality. Create a nice place for me-time? Then apply this color in the bathroom. With Lotus Lush no. 309 you go for a floral combination. Prevent it from becoming too sweet with accents of Night Sky no. 101 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | BEAU BELLE NO. 898
LAB Floor Coating | BEAU BELLE NO. 898
LAB PAINT

LAB Floor Coating | BEAU BELLE NO. 898

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Beau Belle no. 898

A double name with a double character. Beau Belle no. 898 is a light purple-pink with an ash undertone. As a result, this shade has both warm and cold qualities and can be used in many different ways. For example, due to the same graying, it goes well with the somewhat cool Old Legend no. 139 or the warm Diamond Dust no. 232 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | BEACH WALK NO. 415
LAB Floor Coating | BEACH WALK NO. 415
LAB PAINT

LAB Floor Coating | BEACH WALK NO. 415

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Beach Walk no. 415

Beach Walk no. 415 is like a walk on the sand along the Black Sea. The perfect marriage of yellow and black. Warm and natural, like the beach after a sunny day. For the real beachy feeling, combine Beach Walk no. 415 with the light neutrals Daydream no. 436 and Shade of Linen no. 561 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | Avocado Club no. 840
LAB Floor Coating | Avocado Club no. 840
LAB PAINT

LAB Floor Coating | Avocado Club no. 840

€66.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Avocado Club no. 840

Avocado Club no. 840 is an almost black green. Excessively pigmented. For those who dare. Will you also join the club? Light up Avocado Club No. 840 with Mineral Chic No. 728 and spice it up with Racing Rickshaw No. 54.

LAB Floor Coating

A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnate

LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )

LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.

The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!

LAB Floor Coating | Asian Sunrise no. 978
LAB Floor Coating | Asian Sunrise no. 978
LAB PAINT

LAB Floor Coating | Asian Sunrise no. 978

€66.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Asian Sunrise no. 978

A soft neutral where the sun rises with yellow. Asian Sunrise no. 978 is like the dawn under the yellow tones and a good choice for rooms facing north and east. This compensates nicely for the lack of sunlight. Hold on to the summer feeling by combining Asian Sunrise no. 978 with Beach Walk no. 415.

LAB Floor Coating

A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnate

LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )

LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.

The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!

LAB Floor Coating | ARABIC DESERT NO. 710
LAB Floor Coating | ARABIC DESERT NO. 710
LAB PAINT

LAB Floor Coating | ARABIC DESERT NO. 710

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Arabic Desert no. 710

Vibrant sandstone colour. Arabic Desert no. 710 radiates warmth and an oasis of tranquility. Beautiful if you want to experience the atmosphere of Marrakech at home. Enhance the effect by executing this colour in LAB Cementum. Complete the Arabic picture with Nigiri no. 286 and Limited Jade no. 479 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | AMAZE NO. 535
LAB Floor Coating | AMAZE NO. 535
LAB PAINT

LAB Floor Coating | AMAZE NO. 535

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Amaze no. 535

Amaze No. 535 contains the same pigments as the warm Mushroom No. 287 , but then a little more. A deeper earth tone with a wide range of possibilities. Add Limited Jade No. 479 and Soho No. 452 for an amazing combination.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | SOFT FERN NO. 314
LAB Floor Coating | SOFT FERN NO. 314
LAB PAINT

LAB Floor Coating | SOFT FERN NO. 314

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | TERRA PINK NO. 102
LAB Floor Coating | TERRA PINK NO. 102
LAB PAINT

LAB Floor Coating | TERRA PINK NO. 102

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Terra Pink no. 102

Terra Pink no. 102 is a warm, greyed old pink shade with a light earthy undertone. This colour feels mature but retains a certain playfulness. Terra Pink no. 102 looks beautiful with the also warm, greyed, but slightly lighter Madonna no. 90 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | QUIET BLUSH NO. 67
LAB Floor Coating | QUIET BLUSH NO. 67
LAB PAINT

LAB Floor Coating | QUIET BLUSH NO. 67

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Quiet Blush no. 67

A fresh white, a nice base. But don't be mistaken for Quiet Blush no. 67. This shade of white has a subtle, warm undertone. Very nice to add a touch of brightness to an interior with mainly warm materials and colours. Intensify the blush of Quiet Blush no. 67 with Petit Macaron no. 916 andArabic Desert no. 710 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | STRONG GARLIC NO. 92
LAB Floor Coating | STRONG GARLIC NO. 92
LAB PAINT

LAB Floor Coating | STRONG GARLIC NO. 92

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Strong Garlic no. 92

This neutral-but-not-white shade will add a soft glow to your walls. Strong Garlic No. 92 looks great with warm tones like orange and red, but is also a perfect companion for blue and green tones. The shade of Strong Garlic No. 92 is a match with Zen Garden No. 680 and Zanzibar No. 852 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | SOFT BLACK NO. 282
LAB Floor Coating | SOFT BLACK NO. 282
LAB PAINT

LAB Floor Coating | SOFT BLACK NO. 282

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Black no. 282

A soft, off-black with a green undertone. Soft Black no. 282 is inspired by modern urban architecture and graphic street art. A bold black with which you make an impact. Coffee Addict no. 214 goes well with Soft Black no. 282, because this neutral also has a green undertone.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | PURE BLACK NO. 50
LAB Floor Coating | PURE BLACK NO. 50
LAB PAINT

LAB Floor Coating | PURE BLACK NO. 50

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pure Black no. 50

The purest black. Without reaching for other colours, Pure Black no. 50 stands completely on its own. This strong choice can therefore be a striking focus or a reliable connector. With Pure Black no. 50 you increase the contrast in your interior. It is a beautiful accent in combination with almost any colour shade and certainly does not look out of place on your window frames inside or outside.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | NIGHT BLUE NO. 273
LAB Floor Coating | NIGHT BLUE NO. 273
LAB PAINT

LAB Floor Coating | NIGHT BLUE NO. 273

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Night Blue no. 273

Night Blue no. 273 is the darkest blue. This shade tends towards black, but is not quite. In combination with soft lighting and a matte finish, it has a classic and elegant look. Are you looking for a nice white shade with Night Blue no. 273? Then go for the slightly grayed White Wood no. 201 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | SMOKING GRASS NO. 23
LAB Floor Coating | SMOKING GRASS NO. 23
LAB PAINT

LAB Floor Coating | SMOKING GRASS NO. 23

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Smoking Grass no. 23

Smoking Grass no. 23 is a strongly muted green. Due to its greying, this shade is reassuring and provides relaxation. Gold or brass and weathered wood look beautiful with this colour tone. Combine Smoking Grass no. 23 with AMS Leaves no. 602 and trip on the beautiful interplay of the green shades.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | HERO'S TIME NO. 138
LAB Floor Coating | HERO'S TIME NO. 138
LAB PAINT

LAB Floor Coating | HERO'S TIME NO. 138

€66.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Hero's Time no. 138

Hero's Time no. 138 adds luxurious depth to your home and is ideal for use as a background colour. This dark blue shade with black pigment is timeless and makes rooms with high ceilings more intimate and warm. Make a heroic statement by tastefully combining Hero's Time no. 138 with the sandy Golden Leaf no. 752 and Jasmin Blend no. 467 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | BROWN WOOD NO. 222
LAB Floor Coating | BROWN WOOD NO. 222
LAB PAINT

LAB Floor Coating | BROWN WOOD NO. 222

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Brown Wood no. 222

Brown Wood no. 222 is a soft, warm sand tone with tones of old, greyed wood. This light brown goes well with dark browns that you find in walnut wood. Soften Brown Wood no. 222 with a tender base of Soft Pillow no. 264 and add accents with Peppery Black no. 71 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | CANVAS NO. 144
LAB Floor Coating | CANVAS NO. 144
LAB PAINT

LAB Floor Coating | CANVAS NO. 144

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Canvas no. 144

Canvas no. 144 is a comfortable grey. A determined hue that makes a big impact in an extravagantly luxurious interior. This grey is a beautiful canvas for the warm white shade Bloom no. 258 and accents of the dark Night Sky no. 101 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

LAB Floor Coating | SENSATIONAL SAND NO. 290
LAB Floor Coating | SENSATIONAL SAND NO. 290
LAB PAINT

LAB Floor Coating | SENSATIONAL SAND NO. 290

€66.00

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Sensational Sand no. 290

Beachy chic. Sensational Sand no. 290 is a casual sand color that is both laidback and exclusive in character. That is why this natural shade combines in many palettes and fits beautifully in different interior styles. Sensational Sand no. 290 works well with the deep, complementary blue color Gracious Blue no. 792 . Sensational in combination with brass accents.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!