LAB Floor Coating | SCENTED CUMIN NO. 34
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Scented Cumin no. 34
A rich shade inspired by the colour of ground cumin. The pure yellow base of Scented Cumin no. 34 is complemented with black to create an interesting colour that is easy to match with many shades. For a tone-on-tone colour palette, choose Oriental Ecru no. 434 or go for a fresh combination with Nude Cashmere no. 312 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | CRUSHED CLOVES NO. 53
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Crushed Cloves no. 53
Deep and dark. An intimate pure chocolate brown. Crushed Cloves no. 53 is a strong, spicy color with a masculine stature. Use Crushed Cloves no. 53 as a beautiful accent in a chic palette with the neutrals White Truffle no. 644 and Amaze no. 535 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | Gray Clay No. 74
✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)
Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.
Gray Clay No. 74
A creamy greige with a warm glow. Combine with natural materials and go with Gray Clay no. 74 for a Japandi interior style. The pink undertone of Gray Clay no. 74 is more pronounced in a composition with Diamond Dust no. 232 and Merlot Mania no. 123.
LAB Floor Coating
A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnate
LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )
LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.
The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.
How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!
LAB Floor Coating | Masala Chai No. 31
✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)
Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.
Masala Chai No. 31
Creamy and full of extra mystique due to the spices from the Indian tea. Masala Chai no. 31 is a neutral shade that embraces your home. Absolutely warm, as red has been added in abundance to the pale yellow base. Pastel lovers naturally combine Masala Chai no. 31 with Poetic Pondicherry no. 58 and Strong Garlic no. 92.
LAB Floor Coating
A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnate
LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )
LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.
The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.
How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!
LAB Floor Coating | PERFECT PETROL NO. 83
✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Perfect Petrol no. 83
Perfect Petrol no. 83 is an almost tempestuous shade made of mainly blue, but also a bit of emerald green. Go big and make a statement. Beautiful in combination with soft, warm color tones. Frosted Sand no. 374 and Mushroom no. 287 give Perfect Petrol no. 83 more allure.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | SILENCE NO. 107
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Silence no. 107
Silence no. 107 whispers the blue of the infinite sky and the green of the blossoming nature. Very softly… A beautiful, tranquil hue that makes any lack of light less noticeable. Take Silence no. 107 further into the green with Zen Garden no. 680 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | COPPERHEAD NO. 29
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Copperhead no. 29
Copperhead no. 29 is an earthy red with the allure of copper. A powerful and charismatic statement for your interior. The colour shade works well in old mansions, but also looks great with modern design. Emphasise the earthy character by combining Copperhead no. 29 with rattan and coarse weaves or look for the contrast with The Grand no. 325 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | COFFEE ADDICT NO. 214
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Coffee Addict no. 214
A neutral, classic and warm sand shade with a hint of coffee. Coffee Addict no. 214 is an addictive grey-brown that also works very well in LAB Cementum or LAB Chalk! Go for a cloud of milk in your coffee and combine Coffee Addict no. 214 stylishly with Cotton Cloud no. 223 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | MUD SOLDIER NO. 46
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Mud Soldier no. 46
With Mud Soldier no. 46 you are standing with your boots in the mud. This brown with green undertone has a natural and earthy character. Soldier on with a triptych of Oriental Ecru no. 434 , Gorilla Glam no. 386 and Mud Soldier no. 46.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | HUNTER NO. 192
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Hunter no. 192
Hunter No. 192 is a confident, effective shade. For those who know what they want. Fez No. 288 makes Hunter No. 192 a little less rushed. But this striking color can also go very nicely with Straw No. 209 or Billy Button No. 775 because of its yellow timbre.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | BLACK CLAY NO. 40
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Black Clay no. 40
Black Clay no. 40 may seem black at first glance, but it isn't! It is a concentrated, self-assured anthracite. For those who prefer a more natural black. Black Clay no. 40 is a shade of black that fits seamlessly into a stylish, elegant and chic interior. Can be combined well with natural materials or colour shades.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | ROCKY SALT NO. 88
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Rocky Salt no. 88
Looking for an authentic fresh white, without warm undertones? Rocky Salt no. 88 literally feels like a white canvas. It is almost an optical white. The secret is that a single drop of green and blue has been added. That is why Rocky Salt no. 88 goes well with for example Mist no. 128 or Calm Mood no. 155 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | JEWEL NO. 66
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Jewel no. 66
A soft, greyed sand shade with a light pink touch. Jewel no. 66 is an ideal base for a calm and warm colour palette. It is a subtle and delicate pink shade that moves delicately in the background. Jewel no. 66 forms a powdery, soft combination with Bisou Bisou no. 829 which has just a little more pink in it.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | FROSTED SAND NO. 374
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Frosted Sand no. 374
Frosted Sand no. 374 is a soft, warm and light shade consisting of a delicate interplay of beige, grey and cream. A refined white that brings a sense of subtlety. Frosted Sand no. 374 is a frequently used combination with Mushroom no. 287 . But this light shade also combines beautifully with, for example , Diamond Dust no. 232 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | STONE NO. 28
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Stone no. 28
A neutral grey-beige shade with a warm undertone. Stone no. 28 is made up of beige tones with medium grey, like pebbles on an idyllic coastline. Due to its warm undertone, Stone no. 28 combines well with Tempting Taupe no. 675 and Intensive Moss no. 76 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | PALE GREY NO. 93
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Pale Grey no. 93
A soft, pale shade of grey. Pale Grey no. 93 is simple and effortlessly chic. Because this is a very light grey, you retain the spatial effect within your interior, but you still play carefully with colour. Pale Grey no. 93 only has a little black in it. This makes this shade of grey easy to combine with everything.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | SALT NO. 121
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Salt no. 121
White with a salty taste. Salt no. 121 gives peace and calms. As if you are looking at the sea under a typical Dutch cloud cover. Mister MT no. 156 or Nordic Lake no. 747 both stand elegantly and stylishly next to Salt no. 121.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | WHITE WOOD NO. 201
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
White Wood no. 201
White Wood no. 201 is a subtle natural shade. This white with a hint of grey creates a light base with a calming effect. Beautiful in combination with wood! Combine with other light grey shades such as Mineral Chic no. 728 and Stone no. 28 for a serene Scandinavian style.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | ASH GREY NO. 188
✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Ash Grey no. 188
Ash Grey no. 188 is a subtle, soothing and harmonious grey. This ash grey is neutral and a good basis for many interior styles. Ash Grey no. 188 is made up of only black pigments. That makes this ash grey a simple counterpart for other colours, such as Moss no. 41 .
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!
LAB Floor Coating | FULL WHITE NO. 253
✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).
Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.
Full White no. 253
Full White no. 253 is a pure white shade that is the perfect backdrop for both a calm and lively interior style. Of all shades, pure white is the most sensitive to changes in light and shadow. This white increases the effect of daylight and lets it reflect in the space. With Full White no. 253 you can increase the contrast in your color palette. It is a fresh counterpart to almost any color shade.
LAB Floor Coating
A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).
It is important to read the product advice carefully before application.
LAB Floor Coating Impregnation
With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.
Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer
LAB Floor Coating Primer
LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.
Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.
LAB Floor Coating
LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.
Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.
LAB Floor Coating Wear-resistant
LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)
LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.
The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.
Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.
How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.
We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.
Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!