✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Pink Champagne no. 98

Pink Champagne no. 98 is a sparkling and intense old pink shade. This muted pink is extremely romantic, passionate and playful. For example, apply in a modern interior to soften the hard lines or introduce a touch of exuberance. But this idyllic hue will also look good in a neoclassical interior style. Coco no. 554 and Zuzu no. 578 are a reinforcing match for Pink Champagne no. 98.

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high hiding power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cementitious plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 liters) you need 1.25 liter LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

Proper pre-treatment prevents most problems. By pre-treating the surface in the right way, good adhesion with the product can be obtained. Read the product advice for more information about the correct pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete, price-reduced, processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Pink Champagne no. 98

Pink Champagne no. 98 is a sparkling and intense old pink shade. This muted pink is extremely romantic, passionate and playful. For example, apply in a modern interior to soften the hard lines or introduce a touch of exuberance. But this idyllic hue will also look good in a neoclassical interior style. Coco no. 554 and Zuzu no. 578 are a reinforcing match for Pink Champagne no. 98.

LAB Bathroom coating

LAB Bathroom Coating is an easy-to-use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you don't want tiles. But can also go over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnate, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnate

LAB Bathroom Coating Impregnate fixes powdery surfaces and quickly seals highly absorbent surfaces. This makes the covering system of LAB Bathroom Coating easier and smoother to apply and creates a good bond with the substrate.

Is the surface non-absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnate in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer gives you excellent adhesion and color coverage. For absorbent surfaces, make sure that you first treat the bathroom with LAB Bathroom Coating Impregnator. If the surface is not absorbent (such as tiles and already painted or coated bathrooms), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer immediately. For gypsum-bound stucco, plaster and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregneer. After you have applied Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent surfaces rather need 2 layers for a good layer thickness and coverage. Bright and very light colors cover less well. Two layers are also advisable here.

LAB Bathroom coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnate (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet cell of the bathroom.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this with each other and then divide by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnator (calculated with a consumption of 8 m² per kilo) for 1 layer.

Order the complete and reduced price Bathroom coating processing package with these products. Then you can be sure that you have all the tools for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Merlot Mania No. 123

A dark, classic and chic wine color with lots of gray tones and a touch of blue. Merlot Mania no. 123 is a warm, rich, lush and powerful color. For the real connoisseur! Beau Belle no. 898 works well as a light base with Merlot Mania no. 123. Terra Pink no. 102 is a beautiful, striking intermediate color.

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high hiding power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cementitious plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 liters) you need 1.25 liter LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

Proper pre-treatment prevents most problems. By pre-treating the surface in the right way, good adhesion with the product can be obtained. Read the product advice for more information about the correct pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete, price-reduced, processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Fogged Landscape no. 291

Deep green hue with strong graying. Fogged Landscape no. 291 is somewhat reminiscent of oxidized copper green. It therefore combines beautifully with this pink-red metal. You can of course also find this hue in the color Nigiri no. 286 and soften the whole with Petit Macaron no. 916 .

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Fogged Landscape no. 291

Deep green hue with strong graying. Fogged Landscape no. 291 is somewhat reminiscent of oxidized copper green. It therefore combines beautifully with this pink-red metal. You can of course also find this hue in the color Nigiri no. 286 and soften the whole with Petit Macaron no. 916 .

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as a final result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique final result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Forest Green no. 277

Deep, dark green. Forest Green no. 277 creeps a bit towards blue and therefore has an almost petrol character. Beautiful as an accent in an industrial interior or stand out in a house with classic elements. Forest Green no. 277 matches beautifully with gold, dark wood types or a piece of furniture in Silent Cinnamon no. 25. Pull these two colours together by also including Ibiza Rush no. 966 in your colour palette.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Forest Green no. 277

Deep, dark green. Forest Green no. 277 creeps a bit towards blue and therefore has an almost petrol character. Beautiful as an accent in an industrial interior or stand out in a house with classic elements. Forest Green no. 277 matches beautifully with gold, dark wood types or a piece of furniture in Silent Cinnamon no. 25. Pull these two colours together by also including Ibiza Rush no. 966 in your colour palette.

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

LAB Exterior Paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be processed from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

Depending on the colour, surface and location, LAB Exterior Paint Gloss has a maintenance cycle of 10 to 12 years and LAB Exterior Paint Satin has an expected maintenance cycle of 4 to 8 years.

It is important to read the product advice carefully before application.

Consumption : Approximately 17 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 litres) you need 0.6 litres of LAB Exterior Paint for 1 layer (calculated with a consumption of 17 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Always apply LAB Wood Varnish in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Buitenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Buitenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Mist no. 128

Mist no. 128 is a muted echo from nature. A soft, modest green that rises in the white but almost appears gray. Do you have a light Scandinavian palette with for example Quiet Blush no. 67 and Frosted Sand no. 374 ? Then Mist no. 128 is a subtle colorful addition.

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Mist no. 128

Mist no. 128 is a muted echo from nature. A soft, modest green that rises in the white but almost appears gray. Do you have a light Scandinavian palette with for example Quiet Blush no. 67 and Frosted Sand no. 374 ? Then Mist no. 128 is a subtle colorful addition.

LAB Chalk Primer

LAB Chalk Primer is a durable and specially breathable primer. The product has been developed to stabilize surfaces that are finished with LAB Chalk (lime paint). With the latter you can apply beautiful color shades in the LAB COLOR of your choice to the wall.

It is important to read the product advice carefully before application.

Consumption: 8 to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1.11 litres) you need 1.11 litres of LAB Chalk Primer for 1 layer (calculated with a consumption of 9 m² per litre).

Apply LAB Chalk Primer in 1 layer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

Please note! Pre-treat absorbent and powdery surfaces, such as new plasterwork, with LAB Wallfix in the correct colour.

LAB Chalk Primer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this primer and chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Mist no. 128

Mist no. 128 is a muted echo from nature. A soft, modest green that rises in the white but almost appears gray. Do you have a light Scandinavian palette with for example Quiet Blush no. 67 and Frosted Sand no. 374 ? Then Mist no. 128 is a subtle colorful addition.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Pink Peach No. 24

Create a charming interior with Pink Peach no. 24. The hue of the clouds at sunset, an elusive glow that illuminates the sky. This orange-pink shade is soft and creamy with a hint of light peach full of promise. Pink Peach no. 24 goes very well with Nigiri no. 286 and Silk Dreamer no. 194.

LAB Cementum Walls

Go for a raw, lively and atmospheric effect in your interior and choose LAB Cementum. This is an easy-to-use system with which a concrete effect can be created on walls. Determine the appearance of this 'concrete paint' yourself with a fine or coarser end result.

It is important to read the product advice carefully before application.

LAB Cementum Primer

LAB Cementum Primer is an adhesive primer, intended for indoor use, that contains some structure and is therefore excellently suited to obtain a good bond with LAB Cementum Wall. This granular primer can be applied to walls of plasterboard or blocks, new stucco, plaster, Ytong blocks of aerated concrete, tiles, chipboard, mdf and painted walls and is applied in 1 layer.

LAB Cementum Wall

With LAB Cementum Wall you apply the intended concrete look to your wall in 2 layers. You simply distribute the product over the wall with a roller and then create the concrete look with a trowel. You determine the appearance yourself with your own handwriting: fine and atmospheric or a bit coarser and robust.

Always make a test setting before you get started. Applying LAB Cementum Wall is not difficult, but does require a bit of skill and/or practice. Test all the tips from the product advice and determine which effect you like best.

Consumption: LAB Cementum Wall Primer and LAB Cementum Wall are included in the package that you buy for the number of square meters you want (5 m², 10 m² or 25 m² or a multiple thereof).

Optionally apply LAB Cementum Coating Transparent . With this matte top coating, your walls with cementum are very easy to clean and completely waterproof. Ideal for the toilet, bathroom or kitchen.

Do you want to make sure you get all the painting supplies for your project with LAB Cementum? Then choose our complete, price-reduced, processing package .

Do you want to apply this robust concrete look (also) on the floor? Then we recommend the LAB Cementum Floors system.

LAB Cementum Walls is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Cementum Walls, you automatically support the LAB PAINT FOUNDATION. The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Orange Barista no. 117

Orange Barista no. 117 proves that orange doesn't have to be bright, bright and energetic. This sophisticated shade is completely balanced by the exact amount of yellow and red. Subtle, youthful and feminine. Orange Barista no. 117 looks best ton-sur-ton with Masala Chai no. 31.

LAB Floor Coating

A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnate

LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )

LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.

The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Orange Barista no. 117

Orange Barista no. 117 proves that orange doesn't have to be bright, bright and energetic. This sophisticated shade is completely balanced by the exact amount of yellow and red. Subtle, youthful and feminine. Orange Barista no. 117 looks best ton-sur-ton with Masala Chai no. 31.

LAB Bathroom coating

LAB Bathroom Coating is an easy-to-use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you don't want tiles. But can also go over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnate, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnate

LAB Bathroom Coating Impregnate fixes powdery surfaces and quickly seals highly absorbent surfaces. This makes the covering system of LAB Bathroom Coating easier and smoother to apply and creates a good bond with the substrate.

Is the surface non-absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnate in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer gives you excellent adhesion and color coverage. For absorbent surfaces, make sure that you first treat the bathroom with LAB Bathroom Coating Impregnator. If the surface is not absorbent (such as tiles and already painted or coated bathrooms), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer immediately. For gypsum-bound stucco, plaster and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregneer. After you have applied Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent surfaces rather need 2 layers for a good layer thickness and coverage. Bright and very light colors cover less well. Two layers are also advisable here.

LAB Bathroom coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnate (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet cell of the bathroom.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this with each other and then divide by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnator (calculated with a consumption of 8 m² per kilo) for 1 layer.

Order the complete and reduced price Bathroom coating processing package with these products. Then you can be sure that you have all the tools for the job at home!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Purple Palace no. 301

Classic and greyed violet. Purple symbolises power, nobility, luxury and ambition. But this colour is also associated with wisdom, dignity, independence, creativity and mystery. Do you want to integrate these concepts in a magical interior full of allure? Then choose Purple Palace no. 301. Use Urban Dust no. 130 as a beautiful neutral and combine it with Pastel Paradise no. 210 for example.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Old Legend no. 139

Old Legend no. 139 is a greyed shade with an ash character. A mystical and versatile colour that is soothing in the interior. This old legend among the blue-greys can also be the spice for other colours. Pale Grey no. 93 is a very good example of this!

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as a final result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique final result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Heaven No. 350

Let Heaven no. 350 be the light in your home. A dark room becomes optically larger and lighter with this soft, sky blue shade of gray. Create a stunning view by combining with Stunning View no. 32.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer has good coverage and is very easy to sand. LAB Multiprimer has a major positive influence on the durability of the subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for those who want to paint with LAB Interior Lacquer or LAB Exterior Lacquer on wood, mdf, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, rebated doors, the radiator, door fittings, chipboards with foil (like most IKEA cabinets), plastic sockets or covers and pipes. Are you only going to paint wood? Then we recommend LAB Houtprimer Binnen or LAB Houtprimer Buiten before you start painting.

Consumption: 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Multiprimer for 1 layer. For absorbent surfaces, we always recommend applying two layers. Also assess the coverage. Before you start painting with the topcoat, your work must already be properly opaque in the LAB Multiprimer. If necessary, apply 2 layers of this primer.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Urban Dust no. 130

Light gray with a warm undertone. Urban Dust no. 130 is calm and subdued in the background and forms a nice base color if you want to work with warm colours. Look for this warmth, for example, with Arabic Desert no. 710 . This is one of the warm colors that looks great with Urban Dust no. 130.

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high hiding power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cementitious plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 liters) you need 1.25 liter LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

Proper pre-treatment prevents most problems. By pre-treating the surface in the right way, good adhesion with the product can be obtained. Read the product advice for more information about the correct pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete, price-reduced, processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Urban Dust no. 130

Light grey with a warm undertone. Urban Dust no. 130 is calm and restrained in the background and forms a beautiful base colour if you want to work with warm colours. For example, find this warmth with Arabic Desert no. 710 . This is one of the warm colours that looks great with Urban Dust no. 130.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Holy Monkey no. 127

Holy Monkey no. 127 is unprecedentedly intense but also playful and mischievous. A dominant medium brown full of pigments. Enter the jungle and combine this brown with Whispering Woods no. 62 . Or make the color of Holy Monkey no. 127 more chic and refined with Amaze no. 535 .

LAB Exterior Paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be processed from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

Depending on the colour, surface and location, LAB Exterior Paint Gloss has a maintenance cycle of 10 to 12 years and LAB Exterior Paint Satin has an expected maintenance cycle of 4 to 8 years.

It is important to read the product advice carefully before application.

Consumption : Approximately 17 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 litres) you need 0.6 litres of LAB Exterior Paint for 1 layer (calculated with a consumption of 17 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Always apply LAB Wood Varnish in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Buitenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Buitenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!