✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Loft no. 113

Loft no. 113 is a deep, neutral anthracite. Tough and urban. Ideal for bringing out the industrial character in large spaces. Go all the way and urbanize Loft no. 113 with Zuzu no. 578 or the lighter Ash Grey no. 188 .

LAB Interior Paint

LAB Interior Paint is a durable, solvent-free, water-based topcoat. This interior paint for indoors does not yellow, is wear- and scratch-resistant, has very good adhesion and high skin grease resistance.

It is important to read the product advice carefully before application.

Consumption: 10 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 11 m² = 0.2 litres) you need 0.2 litres of LAB Interior Paint for 1 layer (calculated with a consumption of 11 m² per litre).

Apply LAB Interior Paint in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Binnenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Binnenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Loft no. 113

Loft no. 113 is a deep, neutral anthracite. Tough and urban. Ideal for bringing out the industrial character in large spaces. Go all the way and urbanize Loft no. 113 with Zuzu no. 578 or the lighter Ash Grey no. 188 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pink Peach no. 24

Create a charming interior with Pink Peach no. 24. The hue of clouds at sunset, an elusive glow that illuminates the sky. This orange-pink hue is soft and creamy with a hint of light peach full of promise. Pink Peach no. 24 goes very well with Nigiri no. 286 and Silk Dreamer no. 194 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Rocky no. 169

Rocky no. 169 is a mid grey with which you will rock your interior. With this shade you go for a neutral base and you can still go in all directions. Combine Rocky no. 169 with other neutrals such as Pale Grey no. 93 and Loft no. 113 or seek excitement with Tout no. 530 and Terra Pink no. 102 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Rocky no. 169

Rocky no. 169 is a mid grey with which you will rock your interior. With this shade you go for a neutral base and you can still go in all directions. Combine Rocky no. 169 with other neutrals such as Pale Grey no. 93 and Loft no. 113 or seek excitement with Tout no. 530 and Terra Pink no. 102 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Agate no. 167

This neutral grey is completely balanced by the precise amount of black and white added. Agate no. 167 is a refined colour tone that provides elegance, stature and inner peace. Due to its neutral base of only black and white, Agate no. 167 is a colour that you can easily combine with shades with a cool undertone. Then use natural materials such as wood to give the whole warmth.

LAB Exterior Paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be processed from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

Depending on the colour, surface and location, LAB Exterior Paint Gloss has a maintenance cycle of 10 to 12 years and LAB Exterior Paint Satin has an expected maintenance cycle of 4 to 8 years.

It is important to read the product advice carefully before application.

Consumption : Approximately 17 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 litres) you need 0.6 litres of LAB Exterior Paint for 1 layer (calculated with a consumption of 17 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Always apply LAB Wood Varnish in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Buitenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Buitenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pink Champagne no. 98

Pink Champagne no. 98 is a sparkling and intense old pink shade. This muted pink is extremely romantic, passionate and playful. For example, use it in a modern interior to soften the hard lines or introduce a touch of exuberance. But this idyllic shade will also not look out of place in a neoclassical interior style. Coco no. 554 and Zuzu no. 578 are a reinforcing match for Pink Champagne no. 98.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Dark Taupe no. 196

Deep, warm taupe. A robust choice. Dark Taupe no. 196 is a solid colour composed mainly of black. But by adding a lot of yellow and a bit of red, the warmth shines through beautifully. For those who find black too harsh with Mushroom no. 287 and Frosted Sand no. 374 , Dark Taupe no. 196 is a very nice alternative to accentuate these colours.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Silk Dreamer no. 194

Silk Dreamer no. 194 is refined and elegant in all its simplicity. With this dreamy shade you create a calm and silky atmosphere with a personality all of its own. Silk Dreamer no. 194 is a versatile white shade and therefore a perfect base for both warm and cool color palettes.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

White Ice No. 39

A fragile off-white that provides a diffused whole and a soft reflection of light. White Ice no. 39 has a very soft pink undertone and stands out for its subtlety. White Ice no. 39 blends well with shades from the pink spectrum, such as Jewel no. 66 and Diamond Dust no. 232 .

LAB Exterior paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be applied from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

It is important to read the product advice carefully before application.

Consumption : Approx. 17 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this with each other and then divide by the consumption per kilo. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 liters) you need 0.6 liter LAB Exterior Paint (calculated with a consumption of 17 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always apply LAB Houtlak in 2 layers for an optimal and durable result.

Do you want to make sure you have everything you need for your painting project? Then choose the complete, price-reduced lacquer paint processing package .

LAB Exterior Paint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Exterior paint, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

White Ice No. 39

A fragile off-white that provides a diffused whole and a soft reflection of light. White Ice no. 39 has a very soft pink undertone and stands out for its subtlety. White Ice no. 39 blends well with shades from the pink spectrum, such as Jewel no. 66 and Diamond Dust no. 232 .

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high hiding power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cementitious plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 liters) you need 1.25 liter LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

Proper pre-treatment prevents most problems. By pre-treating the surface in the right way, good adhesion with the product can be obtained. Read the product advice for more information about the correct pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete, price-reduced, processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Mrs. Wool no. 108

Mrs. Wool no. 108 is a warm, generous white with yellow pigments. This natural colour tone enhances the richness of its opponents. The off-white is woolly and gives a beautiful texture. Mrs. Wool no. 108 combines beautifully with sand tones, such as Sensational Sand no. 290 and Velvet Fudge no. 380 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Rusty Rebel no. 129

Orange with a vintage feel and a rusty brown undertone. Rebel with Rusty Rebel no. 129 by applying this headstrong color explosion in your interior. Rusty Rebel no. 129 is a beautiful accent on top of the softer shade of Masala Chai no. 31 . Are you still looking for a light base? Then go for Strong Garlic no. 92 .

LAB Cementum Walls

Go for a raw, lively and atmospheric effect in your interior and choose LAB Cementum. This is an easy to process system with which a concrete effect can be created on walls. Determine the look of this 'concrete paint' yourself with a fine or coarser end result.

It is important to read the product advice carefully before application.

LAB Cementum Primer

LAB Cementum Primer is an adhesive primer, intended for indoor use, which contains some structure and is therefore ideally suited to obtain good adhesion with LAB Cementum Wall. This grain primer can be applied to walls made of plasterboard or plaster blocks, new stucco, plasterwork, Ytong blocks of aerated concrete, tiles, chipboard, MDF and painted walls and is applied in 1 layer. Before use, the primer must be diluted with 2-3% water.

LAB Cementum Wall

With LAB Cementum Wall you apply the desired concrete look to your wall in 2 layers. You simply spread the product over the wall with a roller and then create the concrete look with a trowel. You determine the look yourself with your own signature: fine and atmospheric or rather coarser and robust.

Always make a test setting before you start. Applying LAB Cementum Wall is not difficult, but does require some skill and/or practice. Test all the tips from the product advice and determine which effect you like best.

Consumption: LAB Cementum Wall Primer and LAB Cementum Wall are included together in the package that you purchase for the desired number of square meters (5 m², 10 m² or 25 m² or a multiple thereof).

Optionally, apply LAB Cementum Coating Transparent . With this matt top coating, your walls with cementum are very easy to clean and completely waterproof. Ideal for the toilet, bathroom or kitchen.

Want to make sure you get all the painting supplies you need for your project with LAB Cementum? Then choose our complete, reduced-price processing package .

LAB Cementum Walls is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Cementum Walls, you automatically support the LAB PAINT FOUNDATION. The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Straw no. 209

Straw no. 209 is a warm mix of ochre and mustard yellow. This yellow-brown is associated with energy, happiness and intelligence. It stimulates cheerfulness and the brain. Therefore very suitable for the kitchen or a child's room. Soften Straw no. 209 with Ibiza Rush no. 966 or give it extra depth with Warm Tan no. 91 .

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high covering power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cement-based plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

A good pre-treatment prevents most problems. By pre-treating the surface in the right way, a good bond with the product can be obtained. Read the product advice for more information about the right pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Straw no. 209

Straw no. 209 is a warm mix of ochre and mustard yellow. This yellow-brown is associated with energy, happiness and intelligence. It stimulates cheerfulness and the brain. Therefore very suitable for the kitchen or a child's room. Soften Straw no. 209 with Ibiza Rush no. 966 or give it extra depth with Warm Tan no. 91 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Straw no. 209

Straw no. 209 is a warm mix of ochre and mustard yellow. This yellow-brown is associated with energy, happiness and intelligence. It stimulates cheerfulness and the brain. Therefore very suitable for the kitchen or a child's room. Soften Straw no. 209 with Ibiza Rush no. 966 or give it extra depth with Warm Tan no. 91 .

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as a final result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique final result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Straw no. 209

Straw no. 209 is a warm mix of ochre and mustard yellow. This yellow-brown is associated with energy, happiness and intelligence. It stimulates cheerfulness and the brain. Therefore very suitable for the kitchen or a child's room. Soften Straw no. 209 with Ibiza Rush no. 966 or give it extra depth with Warm Tan no. 91 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Monumental Moss no. 265

Monumental Moss no. 265 is a refined green. Soft, mysterious and concealing. Just like the moss. This color is suitable for vintage and retro interior styles. Give Monumental Moss no. 265 more stature by combining it with Scented Cumin no. 34.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer has good coverage and is very easy to sand. LAB Multiprimer has a major positive influence on the durability of the subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for those who want to paint with LAB Interior Lacquer or LAB Exterior Lacquer on wood, mdf, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, rebated doors, the radiator, door fittings, chipboards with foil (like most IKEA cabinets), plastic sockets or covers and pipes. Are you only going to paint wood? Then we recommend LAB Houtprimer Binnen or LAB Houtprimer Buiten before you start painting.

Consumption: 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Multiprimer for 1 layer. For absorbent surfaces, we always recommend applying two layers. Also assess the coverage. Before you start painting with the topcoat, your work must already be properly opaque in the LAB Multiprimer. If necessary, apply 2 layers of this primer.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Whispering Woods no. 62

This green is literally whisper soft. Like nature in autumn, when the bright colors of the green have softened. Whispering Woods no. 62 is subdued by a beautiful aging and warm by the addition of light yellow. Sublime with various types of wood and soft natural nuances, such as Just Jimmy no. 559 and White Wood no. 201 .

LAB Bathroom coating

LAB Bathroom Coating is an easy-to-use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you don't want tiles. But can also go over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnate, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnate

LAB Bathroom Coating Impregnate fixes powdery surfaces and quickly seals highly absorbent surfaces. This makes the covering system of LAB Bathroom Coating easier and smoother to apply and creates a good bond with the substrate.

Is the surface non-absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnate in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer gives you excellent adhesion and color coverage. For absorbent surfaces, make sure that you first treat the bathroom with LAB Bathroom Coating Impregnator. If the surface is not absorbent (such as tiles and already painted or coated bathrooms), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer immediately. For gypsum-bound stucco, plaster and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregneer. After you have applied Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent surfaces rather need 2 layers for a good layer thickness and coverage. Bright and very light colors cover less well. Two layers are also advisable here.

LAB Bathroom coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnate (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet cell of the bathroom.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this with each other and then divide by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnator (calculated with a consumption of 8 m² per kilo) for 1 layer.

Order the complete and reduced price Bathroom coating processing package with these products. Then you can be sure that you have all the tools for the job at home!

✓ Free standard shipping from € 50,-
✓ Ordered before 11:59 PM = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Diamond No. 154

Diamond no. 154 can add a lively and feminine accent in all its forms. Layer this saturated pink hue with a mauve sparkle in an interior with natural light from the south. This creates a nostalgic, elegant and classic look. Beautiful with the somewhat firmer Crazy Emerald no. 762 and the softer Mister MT no. 156.

LAB Wood Primer Inside

LAB Houtprimer Binnen is a high-quality, durable and water-based primer from Dutch soil. Covers well, is odorless and very easy to sand. This primer ensures good adhesion and has a major positive influence on the durability of the subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litre) you need 0.2 liter LAB Houtprimer Indoor for 1 layer (calculated with a consumption of 9 m².

We always recommend applying two coats to untreated wood. Also assess the coverage. Before you start painting with the topcoat, your work must already be fully opaque in the LAB Houtprimer Binnen. If necessary, apply 2 layers of this primer.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete lacquer paint processing package at a reduced price.

LAB Wood Primer Inside is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!