✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pure Black no. 50

The purest black. Without reaching for other colours, Pure Black no. 50 stands completely on its own. This strong choice can therefore be a striking focus or a reliable connector. With Pure Black no. 50 you increase the contrast in your interior. It is a beautiful accent in combination with almost any colour shade and certainly does not look out of place on your window frames inside or outside.

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Pure Black no. 50

The purest black. Without reaching for other colours, Pure Black no. 50 stands completely on its own. This strong choice can therefore be a striking focus or a reliable connector. With Pure Black no. 50 you increase the contrast in your interior. It is a beautiful accent in combination with almost any colour shade and certainly does not look out of place on your window frames inside or outside.

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Night Blue no. 273

Night Blue no. 273 is the darkest blue. This shade tends towards black, but is not quite. In combination with soft lighting and a matte finish, it has a classic and elegant look. Are you looking for a nice white shade with Night Blue no. 273? Then go for the slightly grayed White Wood no. 201 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Velvet Fudge no. 380

Velvet Fudge no. 380 is a trendy, warm caramel brown shade with an ochre base. This velvety brown looks great in a Scandinavian interior style, among other things. Velvet Fudge no. 380 goes well with White Truffle no. 644 . Add more spice with small accents in Pure Black no. 50 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Smoking Grass no. 23

Smoking Grass no. 23 is a strongly muted green. Due to its greying, this shade is reassuring and provides relaxation. Gold or brass and weathered wood look beautiful with this colour tone. Combine Smoking Grass no. 23 with AMS Leaves no. 602 and trip on the beautiful interplay of the green shades.

LAB Exterior Paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be processed from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

Depending on the colour, surface and location, LAB Exterior Paint Gloss has a maintenance cycle of 10 to 12 years and LAB Exterior Paint Satin has an expected maintenance cycle of 4 to 8 years.

It is important to read the product advice carefully before application.

Consumption : Approximately 17 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 litres) you need 0.6 litres of LAB Exterior Paint for 1 layer (calculated with a consumption of 17 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Always apply LAB Wood Varnish in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Buitenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Buitenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Hero's Time no. 138

Hero's Time no. 138 adds luxurious depth to your home and is ideal for use as a background colour. This dark blue shade with black pigment is timeless and makes rooms with high ceilings more intimate and warm. Make a heroic statement by tastefully combining Hero's Time no. 138 with the sandy Golden Leaf no. 752 and Jasmin Blend no. 467 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Brown Wood no. 222

Brown Wood no. 222 is a soft, warm sand tone with tones of old, greyed wood. This light brown goes well with dark browns that you find in walnut wood. Soften Brown Wood no. 222 with a tender base of Soft Pillow no. 264 and add accents with Peppery Black no. 71 .

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Canvas no. 144

Canvas no. 144 is a comfortable grey. A determined hue that makes a big impact in an extravagantly luxurious interior. This grey is a beautiful canvas for the warm white shade Bloom no. 258 and accents of the dark Night Sky no. 101 .

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Sensational Sand no. 290

Beachy chic. Sensational Sand no. 290 is a casual sand color that is both laidback and exclusive in character. That is why this natural shade combines in many palettes and fits beautifully in different interior styles. Sensational Sand no. 290 works well with the deep, complementary blue color Gracious Blue no. 792 . Sensational in combination with brass accents.

LAB Cementum Walls

Go for a raw, lively and atmospheric effect in your interior and choose LAB Cementum. This is an easy to process system with which a concrete effect can be created on walls. Determine the look of this 'concrete paint' yourself with a fine or coarser end result.

It is important to read the product advice carefully before application.

LAB Cementum Primer

LAB Cementum Primer is an adhesive primer, intended for indoor use, which contains some structure and is therefore ideally suited to obtain good adhesion with LAB Cementum Wall. This grain primer can be applied to walls made of plasterboard or plaster blocks, new stucco, plasterwork, Ytong blocks of aerated concrete, tiles, chipboard, MDF and painted walls and is applied in 1 layer. Before use, the primer must be diluted with 2-3% water.

LAB Cementum Wall

With LAB Cementum Wall you apply the desired concrete look to your wall in 2 layers. You simply spread the product over the wall with a roller and then create the concrete look with a trowel. You determine the look yourself with your own signature: fine and atmospheric or rather coarser and robust.

Always make a test setting before you start. Applying LAB Cementum Wall is not difficult, but does require some skill and/or practice. Test all the tips from the product advice and determine which effect you like best.

Consumption: LAB Cementum Wall Primer and LAB Cementum Wall are included together in the package that you purchase for the desired number of square meters (5 m², 10 m² or 25 m² or a multiple thereof).

Optionally, apply LAB Cementum Coating Transparent . With this matt top coating, your walls with cementum are very easy to clean and completely waterproof. Ideal for the toilet, bathroom or kitchen.

Want to make sure you get all the painting supplies you need for your LAB Cementum project? Then choose our complete, reduced-price processing package .

LAB Cementum Walls is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Cementum Walls, you automatically support the LAB PAINT FOUNDATION. The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Racing Rickshaw no. 54

This deep golden hue is full of energy. The generous amount of black makes Racing Riksja no. 54 generous in colour. A touch of red keeps it on the warm side of yellow. Daring in combination with Gracious Blue no. 792 and Spider Mum no. 310 .

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Intensive Moss no. 76

A deep, almost velvety green. Like moss growing on tree bark. Intensive Moss No. 76 is a finely weighted green tone that creeps into a deep olive hue with the addition of yellow. Just Jimmy No. 559 is beautiful as a light base for Intensive Moss No. 76.

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Scented Cumin no. 34

A rich shade inspired by the colour of ground cumin. The pure yellow base of Scented Cumin no. 34 is complemented with black to create an interesting colour that is easy to match with many shades. For a tone-on-tone colour palette, choose Oriental Ecru no. 434 or go for a fresh combination with Nude Cashmere no. 312 .

LAB Chalk Primer

LAB Chalk Primer is a durable and specially breathable primer. The product has been developed to stabilize surfaces that are finished with LAB Chalk (lime paint). With the latter you can apply beautiful color shades in the LAB COLOR of your choice to the wall.

It is important to read the product advice carefully before application.

Consumption: 8 to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1.11 litres) you need 1.11 litres of LAB Chalk Primer for 1 layer (calculated with a consumption of 9 m² per litre).

Apply LAB Chalk Primer in 1 layer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

Please note! Pre-treat absorbent and powdery surfaces, such as new plasterwork, with LAB Wallfix in the correct colour.

LAB Chalk Primer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this primer and chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Crushed Cloves no. 53

Deep and dark. An intimate pure chocolate brown. Crushed Cloves no. 53 is a strong, spicy color with a masculine stature. Use Crushed Cloves no. 53 as a beautiful accent in a chic palette with the neutrals White Truffle no. 644 and Amaze no. 535 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Smokey Eyes no. 47

An impressive appearance. Smokey Eyes no. 47 is a powerful and spicy grayed color where blue predominates and a glimpse of red gives energy. In the interior this blue feels very neutral, so give her some space! Smokey Eyes no. 47 is famous with for example the gray Mineral Chic no. 728 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Silence no. 107

Silence no. 107 whispers the blue of the infinite sky and the green of the blossoming nature. Very softly… A beautiful, tranquil hue that makes any lack of light less noticeable. Take Silence no. 107 further into the green with Zen Garden no. 680 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Coffee Addict no. 214

A neutral, classic and warm sand shade with a hint of coffee. Coffee Addict no. 214 is an addictive grey-brown that also works very well in LAB Cementum or LAB Chalk! Go for a cloud of milk in your coffee and combine Coffee Addict no. 214 stylishly with Cotton Cloud no. 223 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Mud Soldier no. 46

With Mud Soldier no. 46 you are standing with your boots in the mud. This brown with green undertone has a natural and earthy character. Soldier on with a triptych of Oriental Ecru no. 434 , Gorilla Glam no. 386 and Mud Soldier no. 46.

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as a final result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique final result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from actual paint colours depending on screen settings. Light incidence can also largely determine a colour on the wall and the atmosphere in the room. This paint product contains natural elements, which may cause results to vary.

Hunter no. 192

Hunter No. 192 is a confident, effective shade. For those who know what they want. Fez No. 288 makes Hunter No. 192 a little less rushed. But this striking color can also go very nicely with Straw No. 209 or Billy Button No. 775 because of its yellow timbre.

LAB Chalk

LAB Chalk is a durable, matt lime paint for indoor use. With LAB Chalk you can apply beautiful colour shades in a LAB COLOUR of your choice to the wall. Lime paint can be applied in various ways with a block brush, sponge or cloth. For a cloudy effect, paint the wall in circular movements with a block brush, sponge or cloth. Prefer a random pattern? Then apply LAB Chalk criss-cross with a block brush. If you want a streaky effect as an end result, also use a block brush. In this case, apply the lime paint irregularly in a vertical direction from ceiling to skirting board. Everyone has their own unique signature. So you can really put your own spin on it with a unique end result.
LAB Chalk is breathable, mold and bacteria resistant, solvent-free and 100 percent mineral.
Please note! Always pre-treat the surface with LAB Chalk Primer first.

It is important to read the product advice carefully before application!

Consumption: 6 to 10 m² per litre. The consumption of the second layer of LAB Chalk can be higher due to the absorbent effect of the first layer. On the other hand, we recommend diluting the second layer with 30 percent water. This of course increases the yield considerably. All in all, the yield depends on the substrate, pretreatment, method of application, applied layer thickness (don't work too sparingly!), processing material and conditions. Make sure you order enough LAB Chalk, because a second mixture can differ slightly in colour due to the natural properties of lime. Do you unexpectedly have too little paint? Mix a new pot with the paint you have left over and use this for a new layer or wall.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Chalk for 1 layer (calculated with a consumption of 8 m² per litre).

Apply LAB Chalk in 2 layers.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

For intensively used walls, such as stairwells and kitchens, we recommend LAB Chalk Sealer . This makes the wall easy to clean and the surface better protected against dirt and stains.

LAB Chalk is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy this chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Rocky Salt no. 88

Looking for an authentic fresh white, without warm undertones? Rocky Salt no. 88 literally feels like a white canvas. It is almost an optical white. The secret is that a single drop of green and blue has been added. That is why Rocky Salt no. 88 goes well with for example Mist no. 128 or Calm Mood no. 155 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Stone no. 28

A neutral grey-beige shade with a warm undertone. Stone no. 28 is made up of beige tones with medium grey, like pebbles on an idyllic coastline. Due to its warm undertone, Stone no. 28 combines well with Tempting Taupe no. 675 and Intensive Moss no. 76 .

LAB Chalk Primer

LAB Chalk Primer is a durable and specially breathable primer. The product has been developed to stabilize surfaces that are finished with LAB Chalk (lime paint). With the latter you can apply beautiful color shades in the LAB COLOR of your choice to the wall.

It is important to read the product advice carefully before application.

Consumption: 8 to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1.11 litres) you need 1.11 litres of LAB Chalk Primer for 1 layer (calculated with a consumption of 9 m² per litre).

Apply LAB Chalk Primer in 1 layer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

Please note! Pre-treat absorbent and powdery surfaces, such as new plasterwork, with LAB Wallfix in the correct colour.

LAB Chalk Primer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this primer and chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!