✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Saint-Tropez no. 460

Put on your big sunglasses and go for a stroll! You can bring that wonderful feeling into your home if you choose Saint-Tropez no. 460. A colour to subtly show off! The red undertone of Saint-Tropez no. 460 goes very well with the complementary, yet soft greens of Zanzibar no. 852 and Whispering Woods no. 62 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Sugar Kiss no. 733

Pink is far from boring and provides some humor in your interior. Sugar Kiss no. 733 will certainly help you with that! This exuberant pink shade - which tends towards red - looks young, sexy and ravishing. Go for a wainscoting in Sugar Kiss no. 733 and paint the upper part of your wall with Lotus Lush no. 309 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Nigiri no. 286

Delightful and very refined. Nigiri no. 286 is a soft salmon color that subtly adds flavor to your interior. This shade can very well be used as the striking color in a Japandi living style. Nigiri no. 286 merges perfectly in your interior with Saint-Tropez no. 460 and Ibiza Rush no. 966.

LAB Floor Coating

A look-a-like cast floor without high costs. This is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear Resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnate

LAB Floor Coating Impregnate fixes powdery surfaces and seals highly absorbent surfaces quickly. As a result, the covering system of LAB Floor Coating is easier and smoother to apply and good adhesion with the substrate is created. Is the surface non-absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnate in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer gives you excellent adhesion and color coverage. Concrete floors and cement screeds must be treated with LAB Floor Coating Impregnator. If the surface is not absorbent (such as wooden floors, tile floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer immediately.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already get good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for an opaque end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended on floors in kitchens (because stains then have no chance of absorbing into the coating) and floors with a lot of traffic (think of shops and the like or living rooms where people walk with shoes and/or where pets are present). )

LAB Floor Coating Wear Resistant has a milky color, dries transparent and does not yellow. NB! On dark and bright colours, the coating can leave a white cast. In that case, let us color the LAB Floor Coating Wear Resistant in the LAB COLOR of the LAB Floor Coating you used. We are happy to inform you about when this is desirable or not.

The coating makes the surface of the substrate smoother, making the light emission less diffuse. For this reason, colors may experience a slight change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Floor Coating Wear Resistant in at least 2 full layers.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Floor Coating Wear Resistant (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two coats.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete Floor coating processing package with these products at a reduced price . Then you can be sure that you have all the tools for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pastel Paradise no. 210

Pastel Paradise no. 210 is a soothing, greyed pastel. Full of mysticism like in a tropical paradise. With this colour you can relax and let your thoughts wander. Pastel Paradise no. 210 forms a heavenly combination with Coco no. 554 . Or go for an exciting contrast with Silent Cinnamon no. 25 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Gracious Blue no. 792

Both steadfast and graceful. Gracious Blue no. 792 is a fusion of blue foam coral with a segment of coral red. That makes this chic, grayed blue not only cool and confident but also warmhearted. Emphasize this warm side of Gracious Blue no. 792 and go for the combination with Terra Pink no. 102 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Lazy Sunday no. 429

A lazy old pink with a warm undertone. Light pink has a calming effect and Lazy Sunday no. 429 does that for you too. Beautiful for the bedroom! Dream away with Bisou Bisou no. 829 or go for a natural contrast with the grayish green tint The Grand no. 325 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Cotton Cloud no. 223

Although Cotton Cloud no. 223 is the darker version of Spider Mum no. 310 , the color remains soft and woolly. Just like cotton balls, this color has texture and a natural look. Cotton Cloud no. 223 looks heavenly in combination with Limited Jade no. 479 and of course with Spider Mum no. 310 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Gorilla Glam no. 386

Glamorous, brown color. Gorilla Glam no. 386 has a golden undertone and thus provides a warm look in your interior. Gorilla Glam no. 386 combines tone-on-tone beautifully with Oyster Crush no. 581 and Daydream no. 436 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Fluffy Cheetah no. 255

Fluffy Cheetah no. 255 is soft and cuddly. A delicate neutral that hugs the room. Go wild and expand your color palette with beautiful brown natural tones. Golden Leaf no. 752 and Magnum no. 708 go perfectly with the soft Fluffy Cheetah no. 255.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and colour coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the surface is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Oriental Ecru no. 434

Oriental Ecru no. 434 is a versatile color due to its neutral base. Warm and exotic. If you want to explore this oriental feeling further, use this color in LAB Cementum. Cotton Cloud no. 223 and Gorilla Glam no. 386 have a grayish yellow undertone, just like Oriental Ecru no. 434. That's why they go beautifully together!

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Zen Garden no. 680

Green is good for you. So is Zen Garden no. 680! This blend of ecru, pale black and reseda green creates a natural balance and looks great in a botanical interior. Enhance the natural effect by combining it with other shades of green, such as Zanzibar no. 852 and Crazy Emerald no. 762 .

LAB Exterior Paint

LAB Buitenlak is an extremely durable and weather-resistant alkyd paint for outside. This exterior paint flows excellently, can be processed from 0 degrees and has good coverage. Available in two gloss levels: satin and gloss.

Depending on the colour, surface and location, LAB Exterior Paint Gloss has a maintenance cycle of 10 to 12 years and LAB Exterior Paint Satin has an expected maintenance cycle of 4 to 8 years.

It is important to read the product advice carefully before application.

Consumption : Approximately 17 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 17 m² = 0.6 litres) you need 0.6 litres of LAB Exterior Paint for 1 layer (calculated with a consumption of 17 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Always apply LAB Wood Varnish in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Buitenlak is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Buitenlak, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Arabic Desert no. 710

Vibrant sandstone colour. Arabic Desert no. 710 radiates warmth and an oasis of tranquility. Beautiful if you want to experience the atmosphere of Marrakech at home. Enhance the effect by executing this colour in LAB Cementum. Complete the Arabic picture with Nigiri no. 286 and Limited Jade no. 479 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

White Wood no. 201

White Wood no. 201 is a subtle natural shade. This white with a hint of grey creates a light base with a calming effect. Beautiful in combination with wood! Combine with other light grey shades such as Mineral Chic no. 728 and Stone no. 28 for a serene Scandinavian style.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Terra Pink no. 102

Terra Pink no. 102 is a warm, greyed old pink shade with a light earthy undertone. This colour feels mature but retains a certain playfulness. Terra Pink no. 102 looks beautiful with the also warm, greyed, but slightly lighter Madonna no. 90 .

LAB Cementum Walls

Go for a raw, lively and atmospheric effect in your interior and choose LAB Cementum. This is an easy to process system with which a concrete effect can be created on walls. Determine the look of this 'concrete paint' yourself with a fine or coarser end result.

It is important to read the product advice carefully before application.

LAB Cementum Primer

LAB Cementum Primer is an adhesive primer, intended for indoor use, which contains some structure and is therefore ideally suited to obtain good adhesion with LAB Cementum Wall. This grain primer can be applied to walls made of plasterboard or plaster blocks, new stucco, plasterwork, Ytong blocks of aerated concrete, tiles, chipboard, MDF and painted walls and is applied in 1 layer. Before use, the primer must be diluted with 2-3% water.

LAB Cementum Wall

With LAB Cementum Wall you apply the desired concrete look to your wall in 2 layers. You simply spread the product over the wall with a roller and then create the concrete look with a trowel. You determine the look yourself with your own signature: fine and atmospheric or rather coarser and robust.

Always make a test setting before you start. Applying LAB Cementum Wall is not difficult, but does require some skill and/or practice. Test all the tips from the product advice and determine which effect you like best.

Consumption: LAB Cementum Wall Primer and LAB Cementum Wall are included together in the package that you purchase for the desired number of square meters (5 m², 10 m² or 25 m² or a multiple thereof).

Optionally, apply LAB Cementum Coating Transparent . With this matt top coating, your walls with cementum are very easy to clean and completely waterproof. Ideal for the toilet, bathroom or kitchen.

Want to make sure you get all the painting supplies you need for your project with LAB Cementum? Then choose our complete, reduced-price processing package .

LAB Cementum Walls is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Cementum Walls, you automatically support the LAB PAINT FOUNDATION. The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

White Clay no. 61

White is associated with light, goodness, innocence, purity and virginity. It is considered the colour of perfection. With White Clay no. 61 you bring that into your home. A white with a very soft, natural green undertone. The neutrals with a green undertone go well with White Clay no. 61. Take for example Mud Soldier no. 46 or Soho no. 452 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Quiet Blush no. 67

A fresh white, a nice base. But don't be mistaken for Quiet Blush no. 67. This shade of white has a subtle, warm undertone. Very nice to add a touch of brightness to an interior with mainly warm materials and colours. Intensify the blush of Quiet Blush no. 67 with Petit Macaron no. 916 andArabic Desert no. 710 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Black no. 282

A soft, off-black with a green undertone. Soft Black no. 282 is inspired by modern urban architecture and graphic street art. A bold black with which you make an impact. Coffee Addict no. 214 goes well with Soft Black no. 282, because this neutral also has a green undertone.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Black no. 282

A soft, off-black with a green undertone. Soft Black no. 282 is inspired by modern urban architecture and graphic street art. A bold black with which you make an impact. Coffee Addict no. 214 goes well with Soft Black no. 282, because this neutral also has a green undertone.

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!