✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Satin Grey no. 551

Satin grey with a powdery look. Satin Grey no. 551 is a light medium grey. For those who want to get rid of white and are looking for a subtle colour shade with allure. The deep Harbour no. 968 has the same warm glow over the grey and therefore matches perfectly with Satin Grey no. 551.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Lotus Lush no. 309

If a hug had a colour, it would be pink. Like Lotus Lush no. 309. Create a welcoming feel with this opulent pink with a touch of silver. Go for a golden touch by adding brass details and increase the opulence. Freedom no. 965 is the most suitable shade of white for Lotus Lush no. 309.

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Sparkling Sapphire no. 810

Sparkling Sapphire no. 810 is a dramatic and sparkling colour shade. A valuable sapphire blue that provides peace. Is blue your favourite colour and do you like to extend it a bit? The dark Gracious Blue no. 792 or the lighter Powder Blush no. 132 look very tasteful with Sparkling Sapphire no. 810 due to the same greying.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Golden Leaf no. 752

A low sun on a discolouring canopy of leaves. Golden Leaf no. 752 is the colour of autumn that symbolises strength and introspection. A beautiful shade of brown that has not yet lost its vitality. Give more depth to Golden Leaf no. 752 with Magnum no. 708 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Zanzibar no. 852

Some greens almost fall under the neutrals. Zanzibar no. 852 is a good example of that. It is a journey in paradise. From waving palm trees, pearly white beaches and sunsets to the idyllic green interior. Zanzibar no. 852 can be nicely in a palette with Magnum no. 708 and Dark Taupe no. 196 , but also harmoniously matches The Grand no. 325 and Hero's Time no. 138 .

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high covering power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cement-based plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

A good pre-treatment prevents most problems. By pre-treating the surface in the right way, a good bond with the product can be obtained. Read the product advice for more information about the right pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Zanzibar no. 852

Some greens almost fall under the neutrals. Zanzibar no. 852 is a good example of that. It is a journey in paradise. From waving palm trees, pearly white beaches and sunsets to the idyllic green interior. Zanzibar no. 852 can be nicely in a palette with Magnum no. 708 and Dark Taupe no. 196 , but also harmoniously matches The Grand no. 325 and Hero's Time no. 138 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Fez no. 288

Do you also see the famous Moroccan city in this color? Fez no. 288 is made up of the same natural color nuances. For a beautiful, oriental atmosphere in your home. Let yourself be carried away further in that rich culture with Golden Leaf no. 752 and Limited Jade no. 479 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Bliss no. 939

Blissful, soft, warm grey. Bliss no. 939 is a grey shade that is multifunctional due to its low saturation. This allows you to use it within different colour palettes. Due to its warmth, Bliss no. 939 is also beautiful with blue shades, so that they do not become too cold. Think for example of Old Legend no. 139 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Beach Walk no. 415

Beach Walk no. 415 is like a walk on the sand along the Black Sea. The perfect marriage of yellow and black. Warm and natural, like the beach after a sunny day. For the real beachy feeling, combine Beach Walk no. 415 with the light neutrals Daydream no. 436 and Shade of Linen no. 561 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Bisou Bisou no. 829

Bisou Bisou no. 829 is like a kiss for your interior. Is your home a bit too tight and businesslike for you? With this grayed vintage pink shade you can easily soften hard architectural lines. Bisou Bisou no. 829 can be given a luxurious touch by adding dark elements, such as walnut. Or create beautiful details with the color Holy Monkey no. 127 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Limited Jade no. 479

Limited Jade no. 479 is a pleasant muted green colour. Full of subdued refinement. This green has a calming and comforting effect. Nude Cashmere no. 312 and accents of Tout no. 530 look great with Limited Jade no. 479. These colours are contrasting, but fit together very well due to the same greying.

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high covering power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cement-based plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

A good pre-treatment prevents most problems. By pre-treating the surface in the right way, a good bond with the product can be obtained. Read the product advice for more information about the right pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Beach Walk no. 415

Beach Walk no. 415 is like a walk on the sand along the Black Sea. The perfect marriage of yellow and black. Warm and natural, like the beach after a sunny day. For the real beachy feeling, combine Beach Walk no. 415 with the light neutrals Daydream no. 436 and Shade of Linen no. 561 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Chalk Primer

LAB Chalk Primer is a durable and specially breathable primer. The product has been developed to stabilize surfaces that are finished with LAB Chalk (lime paint). With the latter you can apply beautiful color shades in the LAB COLOR of your choice to the wall.

It is important to read the product advice carefully before application.

Consumption: 8 to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1.11 litres) you need 1.11 litres of LAB Chalk Primer for 1 layer (calculated with a consumption of 9 m² per litre).

Apply LAB Chalk Primer in 1 layer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price LAB Chalk processing package .

Please note! Pre-treat absorbent and powdery surfaces, such as new plasterwork, with LAB Wallfix in the correct colour.

LAB Chalk Primer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. When producing our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do even better. If you buy this primer and chalk paint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Quiet Blush no. 67

A fresh white, a nice base. But don't be mistaken for Quiet Blush no. 67. This shade of white has a subtle, warm undertone. Very nice to add a touch of brightness to an interior with mainly warm materials and colours. Intensify the blush of Quiet Blush no. 67 with Petit Macaron no. 916 andArabic Desert no. 710 .

LAB Floor Coating

A look-alike cast floor without high costs. That is possible with LAB Floor Coating. The LAB Floor Coating system consists of four different products, namely: LAB Floor Coating Impregnator, LAB Floor Coating Primer, LAB Floor Coating and LAB Floor Coating Wear-resistant (optional).

It is important to read the product advice carefully before application.

LAB Floor Coating Impregnation

With LAB Floor Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Floor Coating easier and more even to apply and creates a good bond with the surface. Is the surface not absorbent? Then this first step is not necessary.

Consumption: 6 to 10 m² per kilo. Apply LAB Floor Coating Impregnation in 1 layer

LAB Floor Coating Primer

LAB Floor Coating Primer provides excellent adhesion and color coverage. Concrete floors and cement screeds should be treated with LAB Floor Coating Impregnation. If the substrate is not absorbent (such as wooden floors, tiled floors, existing cast floors and already painted or coated floors), step 1 (the impregnation) can be skipped and you can apply LAB Floor Coating Primer directly.

Consumption: 5 to 8 m² per kilo. Apply LAB Floor Coating Primer in 2 layers. It is important that you already obtain good coverage with the primer before you continue with step 3.

LAB Floor Coating

LAB Floor Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean. You apply LAB Floor Coating to floors that have been treated with LAB Floor Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Floor Coating Primer.

Consumption: 7 to 10 m² per kilo. Apply LAB Floor Coating in two layers. It is important that you have already obtained good coverage with LAB Floor Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

LAB Floor Coating Wear-resistant

LAB Floor Coating Wear-resistant is optionally the fourth step of the LAB Floor Coating system. It is especially recommended for floors in kitchens (because stains then have no chance to penetrate the coating) and floors with a lot of traffic (think of shops and such or living rooms where shoes are walked on and/or where pets are present.)

LAB Floor Coating Wear-resistant has a milky colour, dries transparent and does not yellow. Please note! The coating can leave a white haze on dark and bright colours. In that case, have the LAB Floor Coating Wear-resistant coloured by us in the LAB COLOUR of the LAB Floor Coating you used. We will be happy to inform you when this is or is not desirable.

The coating makes the surface of the substrate smoother, which makes the light radiation less diffuse. For this reason, colours can show a small change in appearance. If in doubt, make a test area or come and view our samples in our concept store.

Consumption: 8 to 12 m² per litre. Apply LAB Vloercoating Slijtvast in at least 2 full layers.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a floor surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Vloercoating Slijtvast (calculated with a consumption of 10 m² per litre) for 1 layer. We always recommend applying two layers.

We do not recommend using the entire LAB Floor Coating system on the floor in the wet room of the bathroom.

Order the complete and reduced price Floor coating processing package with these products . Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Whispering Woods no. 62

This green is literally whisper-soft. Like nature in autumn, when the bright colours of the green have softened. Whispering Woods no. 62 is subdued by a beautiful greying and warm by the addition of light yellow. Sublime with various types of wood and soft natural nuances, such as Just Jimmy no. 559 and White Wood no. 201 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Warm Tan no. 91

Warm, tanned glow. Although Warm Tan no. 91 is a very distinctive and distinctive colour, it can be used in many different ways and fits into various interior styles. Take the hard edge off Warm Tan no. 91 with Oyster Crush no. 581 and Just Jimmy no. 559 for a tasteful palette.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Black no. 282

A soft, off-black with a green undertone. Soft Black no. 282 is inspired by modern urban architecture and graphic street art. A bold black with which you make an impact. Coffee Addict no. 214 goes well with Soft Black no. 282, because this neutral also has a green undertone.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Pure Black no. 50

The purest black. Without reaching for other colours, Pure Black no. 50 stands completely on its own. This strong choice can therefore be a striking focus or a reliable connector. With Pure Black no. 50 you increase the contrast in your interior. It is a beautiful accent in combination with almost any colour shade and certainly does not look out of place on your window frames inside or outside.

LAB Wallpaint Exterior

LAB Wallpaint Exterior is a weather-resistant paint with high covering power for exterior walls. This professional and durable wall paint is suitable for finishing masonry and cement-based plasters outdoors.

It is important to read the product advice carefully before application.

Consumption : 7 to 8 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 litres) you need 1.25 litres of LAB Wallpaint Exterior for 1 layer (calculated with a consumption of 8 m² per litre).

A good pre-treatment prevents most problems. By pre-treating the surface in the right way, a good bond with the product can be obtained. Read the product advice for more information about the right pre-treatment. Apply LAB Wallpaint Exterior in 2 layers for an optimal and durable result.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint Exterior is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint Exterior, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Hero's Time no. 138

Hero's Time no. 138 adds luxurious depth to your home and is ideal for use as a background colour. This dark blue shade with black pigment is timeless and makes rooms with high ceilings more intimate and warm. Make a heroic statement by tastefully combining Hero's Time no. 138 with the sandy Golden Leaf no. 752 and Jasmin Blend no. 467 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!