✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Mushroom no. 287

Mushroom no. 287 is a warm earth tone with a mix of beige, grey and cream. For a calm, natural atmosphere that fits in a versatile interior. Are you painting the walls with Mushroom no. 287? Then Frosted Sand no. 374 is the perfect colour for your ceiling.

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for walls and ceilings indoors is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

White Truffle no. 644

A light beige with a brown-grey undertone. White Truffle no. 644 is the ideal choice for those who find Mushroom no. 287 a little too dark. It is a refined interpretation of this versatile colour. To give this typical greige more depth, combine White Truffle no. 644 very chicly with Harbour no. 968 and Night Sky no. 101 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for walls and ceilings indoors is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Nigiri no. 286

Delicious and very refined. Nigiri no. 286 is a soft salmon color that subtly adds flavor to your interior. This shade can be used very well as the striking color in a Japandi interior style. Nigiri no. 286 blends perfectly in your interior with Saint-Tropez no. 460 and Ibiza Rush no. 966 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Golden Leaf no. 752

A low sun on a discolouring canopy of leaves. Golden Leaf no. 752 is the colour of autumn that symbolises strength and introspection. A beautiful shade of brown that has not yet lost its vitality. Give more depth to Golden Leaf no. 752 with Magnum no. 708 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

All no. 530

Tout no. 530 has it all. This brown-pink looks great in various interior styles. From chic to bohemian. From design to retro. Get the most out of Tout no. 530 and make it extra elegant with the gray shade Voilà Paris no. 651 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Limited Jade no. 479

Limited Jade no. 479 is a pleasant muted green colour. Full of subdued refinement. This green has a calming and comforting effect. Nude Cashmere no. 312 and accents of Tout no. 530 look great with Limited Jade no. 479. These colours are contrasting, but fit together very well due to the same greying.

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for walls and ceilings indoors is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Fern no. 314

Inky grey-green. Soft Fern no. 314 symbolises eternal youth in both its colour and name. It is a good option for the bedroom, because this green calms and has a relaxing effect. Fez no. 288 and Oriental Ecru no. 434 form a beautiful colour palette with Soft Fern no. 314.

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Straw no. 209

Straw no. 209 is a warm mix of ochre and mustard yellow. This yellow-brown is associated with energy, happiness and intelligence. It stimulates cheerfulness and the brain. Therefore very suitable for the kitchen or a child's room. Soften Straw no. 209 with Ibiza Rush no. 966 or give it extra depth with Warm Tan no. 91 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Cotton Cloud no. 223

Although Cotton Cloud no. 223 is the darker version of Spider Mum no. 310 , the color remains soft and woolly. Just like cotton balls, this color has texture and a natural look. Cotton Cloud no. 223 looks heavenly in combination with Limited Jade no. 479 and of course with Spider Mum no. 310 .

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for walls and ceilings indoors is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Warm Tan no. 91

Warm, tanned glow. Although Warm Tan no. 91 is a very distinctive and distinctive colour, it can be used in many different ways and fits into various interior styles. Take the hard edge off Warm Tan no. 91 with Oyster Crush no. 581 and Just Jimmy no. 559 for a tasteful palette.

LAB Wallpaint

LAB Wallpaint is a water-based matt wall paint. This durable finish for indoor walls and ceilings is easy to apply, provides good coverage and can be cleaned according to scrub class 1. The paint meets the requirements of the French A+ label and the requirements of the sustainability quality mark BREEAM (HEA9), which guarantees a clean indoor climate. Safe enough to use in, for example, baby rooms and hospitals.

It is important to read the product advice carefully before application.

Consumption: 8 to 12 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Wallpaint for 1 layer (calculated with a consumption of 10 m² per litre).

In general, we recommend 2 coats. With some colours, a single coat seems to cover, but then you do not achieve scrub class 1. When LAB Wallpaint is applied over an existing wall paint with a dark or bright colour or when you choose a bright or light LAB COLOUR, more than 2 coats may be necessary to achieve perfect coverage. Coverage is of course also dependent on the method of application (roller, brush or spray), processing materials (for example type of roller) and applied layer thickness.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price processing package .

LAB Wallpaint is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallpaint, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Want to see wallpaper in real life? Visit the concept store .
✓ Wallpaper is delivered to order and cannot be returned.
✓ Please allow an average delivery time of 5-6 working days.
✓ Pick up in Bussum (Mon to Sat).

ELITIS Milos Wallpaper

The ÉLITIS Milos wallpaper is a beautiful relief vinyl wallpaper with the appearance of embroidery on linen. The wallpaper immediately gives warmth and extra texture to the room.

The Milos wallpaper is available in various colours. Choose the right colour here online or together with one of our interior designers, to match your taste and interior.

How much wallpaper do I need? Order a wallpaper sample first?

Use the wallpaper calculator to find out how much wallpaper you need.

Wallpaper is ordered especially for you and cannot be returned for this reason.
Would you rather see the wallpaper in real life first? In our concept store in Bussum you can view the wallpaper book with us, so that you can view the color and structure. Of course you can also order a sample.

How much wallpaper do I need? Order a wallpaper sample first?

Use the wallpaper calculator to find out how much wallpaper you need.

Wallpaper is ordered especially for you and can therefore not be returned. Would you rather see the wallpaper in real life first? In our concept store in Bussum you can view the wallpaper book with us, so that you can view the color and structure.

Still in doubt? Send an email to support@vestingh.nl with the height and width of the wall(s) with possibly a simple drawing with the measurements. And we will calculate it for you.

ÉLITIS Lins Brodes Wallpaper

ÉLITIS Lins Brodes Wallpaper collection will soon be available online and in the concept store. The collection is inspired by linen wallpaper with a Greek twist. The collection is cheerful, lively and extrovert. The wallpaper is available in a number of variants such as a plain linen, but is also available in combination with primitive and exuberant embroidery. The wallpaper has natural, warm and lively accents.

ÉLITIS Milos wallpaper is available online here and in our concept store.

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Cotton Cloud no. 223

Although Cotton Cloud no. 223 is the darker version of Spider Mum no. 310 , the color remains soft and woolly. Just like cotton balls, this color has texture and a natural look. Cotton Cloud no. 223 looks heavenly in combination with Limited Jade no. 479 and of course with Spider Mum no. 310 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnator you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

All no. 530

Tout no. 530 has it all. This brown-pink looks great in various interior styles. From chic to bohemian. From design to retro. Get the most out of Tout no. 530 and make it extra elegant with the gray shade Voilà Paris no. 651 .

LAB Bathroom Coating

LAB Bathroom Coating is an easy to use system specially developed for bathrooms and wet cells, such as the shower room (with the exception of the floor in the wet cell). Ideal if you do not want tiles. But can also be applied over tiles! The LAB Bathroom Coating system consists of three different products, namely: LAB Bathroom Coating Impregnator, LAB Bathroom Coating Primer and LAB Bathroom Coating.

It is important to read the product advice carefully before application!

LAB Bathroom Coating Impregnation

With LAB Bathroom Coating Impregnation you fix powdery surfaces and highly absorbent surfaces are quickly sealed. This makes the covering system of LAB Bathroom Coating easier and more even to apply and creates a good bond with the surface.

Is the surface not absorbent? Then this step is not necessary.

Consumption: 6 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Impregnator in 1 layer.

LAB Bathroom Coating Primer

LAB Bathroom Coating Primer provides excellent adhesion and colour coverage. For absorbent surfaces, first treat the bathroom with LAB Bathroom Coating Impregnation. If the surface is not absorbent (such as tiles and bathrooms that have already been painted or coated), step 1 (impregnation) can be skipped and you can apply LAB Bathroom Coating Primer directly. For gypsum-based stucco, plasterwork and Ytong blocks of aerated concrete, we recommend using Renovlies instead of LAB Bathroom Coating Impregnation. After applying Renovlies, you can get started with LAB Bathroom Coating Primer.

Consumption: 5 to 8 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating Primer in 1 or 2 layers. Rough, absorbent substrates require 2 layers for good layer thickness and coverage. Bright and very light colours cover less well. Two layers are also advisable in this case.

LAB Bathroom Coating

LAB Bathroom Coating is a colourfast coating that does not yellow. The coating is impact and scratch resistant and easy to clean.

You apply LAB Bathroom Coating to surfaces that have been treated with LAB Bathroom Coating Impregnator (only necessary for absorbent surfaces) and/or LAB Bathroom Coating Primer.

Consumption: 7 to 10 m² per kilo. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions. Apply LAB Bathroom Coating in two layers. It is important that you have already obtained good coverage with LAB Bathroom Coating Primer in step 2, especially with bright and white colours. Otherwise, two layers of coating may not be sufficient for a covering end result.

We do not recommend using the entire LAB Bathroom Coating system on the floor in the wet room of the bathroom.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 8 m² = 1.25 kilos) you need 1.25 kilos of LAB Bathroom Coating Impregnation for 1 layer (calculated with a consumption of 8 m² per kilo).

Order the complete and reduced price Bathroom coating processing package with these products. Then you know for sure that you have all the supplies for the job at home!