✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Harbor no. 968

Raw, tough gray. Harbor no. 968 is sober but intense. This deep shade of gray with a brown nuance is a beautiful signature for a charismatic interior. Set sail for unknown horizons with Nude Cashmere No. 312.

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Harbor no. 968

Raw, tough gray. Harbor no. 968 is sober but intense. This deep shade of gray with a brown nuance is a beautiful signature for a charismatic interior. Set sail for unknown horizons with Nude Cashmere No. 312.

LAB Wood Primer Outside

LAB Houtprimer Buiten is an extremely suitable primer for outdoor wood that you want to finish with LAB Buitenlak. It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litre) you need 0.7 liter LAB Houtprimer Buiten for 1 layer (calculated with a consumption of 15 m²). We always recommend applying two coats to untreated wood.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess coverage. Before you start painting with LAB Buitenlak, your work must already have good coverage in the LAB Houtprimer Buiten. If necessary, apply 2 coats of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Miss Satin No. 330

A light pink broken white that feels satiny and feminine. Miss Satin no. 330 gives warmth and is therefore a good choice for rooms facing north. Lazy Sunday no. 429 and In Between no. 672 form an elegant interplay with Miss Satin no. 330.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer has good coverage and is very easy to sand. LAB Multiprimer has a major positive influence on the durability of the subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for those who want to paint with LAB Interior Lacquer or LAB Exterior Lacquer on wood, mdf, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, rebated doors, the radiator, door fittings, chipboards with foil (like most IKEA cabinets), plastic sockets or covers and pipes. Are you only going to paint wood? Then we recommend LAB Houtprimer Binnen or LAB Houtprimer Buiten before you start painting.

Consumption: 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Multiprimer for 1 layer. For absorbent surfaces, we always recommend applying two layers. Also assess the coverage. Before you start painting with the topcoat, your work must already be properly opaque in the LAB Multiprimer. If necessary, apply 2 layers of this primer.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Harbor no. 968

Raw, tough gray. Harbor no. 968 is sober but intense. This deep shade of gray with a brown nuance is a beautiful signature for a charismatic interior. Set sail for unknown horizons with Nude Cashmere No. 312.

LAB Wood Primer Inside

LAB Houtprimer Binnen is a high-quality, durable and water-based primer from Dutch soil. Covers well, is odorless and very easy to sand. This primer ensures good adhesion and has a major positive influence on the durability of the subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litre) you need 0.2 liter LAB Houtprimer Indoor for 1 layer (calculated with a consumption of 9 m².

We always recommend applying two coats to untreated wood. Also assess the coverage. Before you start painting with the topcoat, your work must already be fully opaque in the LAB Houtprimer Binnen. If necessary, apply 2 layers of this primer.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete lacquer paint processing package at a reduced price.

LAB Wood Primer Inside is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Soft Pillow no. 264

A muted white with soft beige tones. To relax. Soft Pillow no. 264 is preferred as a base in an interior with natural gray and brown tones. Dream away together with Vanilla Comfort no. 149 and Petit Macaron no. 916.

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Soft Pillow no. 264

A muted white with soft beige tones. To relax. Soft Pillow no. 264 is preferred as a base in an interior with natural gray and brown tones. Dream away together with Vanilla Comfort no. 149 and Petit Macaron no. 916.

LAB Wood Primer Outside

LAB Houtprimer Buiten is an extremely suitable primer for outdoor wood that you want to finish with LAB Buitenlak. It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litre) you need 0.7 liter LAB Houtprimer Buiten for 1 layer (calculated with a consumption of 15 m²). We always recommend applying two coats to untreated wood.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess coverage. Before you start painting with LAB Buitenlak, your work must already have good coverage in the LAB Houtprimer Buiten. If necessary, apply 2 coats of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Mineral Chic no. 728

Pure balance with this clean, yet chic shade of grey. Mineral Chic no. 728 is a nice starting point for a neutral base. By combining with the ton-sur-ton color palette of Smoking Grass no. 23 and AMS Leaves no. 602, you bring out the green-yellow tones from this gray shade very nicely.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer has good coverage and is very easy to sand. LAB Multiprimer has a major positive influence on the durability of the subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for those who want to paint with LAB Interior Lacquer or LAB Exterior Lacquer on wood, mdf, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, rebated doors, the radiator, door fittings, chipboards with foil (like most IKEA cabinets), plastic sockets or covers and pipes. Are you only going to paint wood? Then we recommend LAB Houtprimer Binnen or LAB Houtprimer Buiten before you start painting.

Consumption: 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Multiprimer for 1 layer. For absorbent surfaces, we always recommend applying two layers. Also assess the coverage. Before you start painting with the topcoat, your work must already be properly opaque in the LAB Multiprimer. If necessary, apply 2 layers of this primer.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Soft Pillow no. 264

A muted white with soft beige tones. To relax. Soft Pillow no. 264 is preferred as a base in an interior with natural gray and brown tones. Dream away together with Vanilla Comfort no. 149 and Petit Macaron no. 916.

LAB Wood Primer Inside

LAB Houtprimer Binnen is a high-quality, durable and water-based primer from Dutch soil. Covers well, is odorless and very easy to sand. This primer ensures good adhesion and has a major positive influence on the durability of the subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litre) you need 0.2 liter LAB Houtprimer Indoor for 1 layer (calculated with a consumption of 9 m².

We always recommend applying two coats to untreated wood. Also assess the coverage. Before you start painting with the topcoat, your work must already be fully opaque in the LAB Houtprimer Binnen. If necessary, apply 2 layers of this primer.

Do you want to make sure you have everything you need for your painting project? Then opt for the complete lacquer paint processing package at a reduced price.

LAB Wood Primer Inside is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Vanilla Comfort no. 149

Vanilla Comfort no. 149 is a beautiful color to completely envelop you. A slightly sweet, neutral shade due to its rouge undertone. Vanilla Comfort no. 149 looks wonderful with Madonna no. 90 and accents of Silent Cinnamon no. 25 .

LAB Wallfix

LAB Wallfix is ​​a semi-opaque primer that allows you to pre-treat powdery and absorbent surfaces such as new stucco both inside and outside before you get started with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the correct colour, so that you color the surface with the application of the primer and strongly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield strongly depends on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 liter LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

We recommend LAB Wallfix in two layers for very absorbent or powdery surfaces. In general, especially indoors, this is not necessary.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Vanilla Comfort no. 149

Vanilla Comfort no. 149 is a beautiful color to completely envelop you. A slightly sweet, neutral shade due to its rouge undertone. Vanilla Comfort no. 149 looks wonderful with Madonna no. 90 and accents of Silent Cinnamon no. 25 .

LAB Wood Primer Outside

LAB Houtprimer Buiten is an extremely suitable primer for outdoor wood that you want to finish with LAB Buitenlak. It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litre) you need 0.7 liter LAB Houtprimer Buiten for 1 layer (calculated with a consumption of 15 m²). We always recommend applying two coats to untreated wood.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess coverage. Before you start painting with LAB Buitenlak, your work must already have good coverage in the LAB Houtprimer Buiten. If necessary, apply 2 coats of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Mighty Marshmallow No. 837

Subtle sweet pink to lick your fingers. Mighty Marshmallow no. 837 is a tasteful, sugared pastel pink. So beautiful you want to touch it. This color tone relieves tension and has a calming effect. That's why it's also a good idea for the bedroom, for example! Mighty Marshmallow no. 837 merges great with, for example, Lipstick Lover no. 908 and Miss Satin no. 330.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer has good coverage and is very easy to sand. LAB Multiprimer has a major positive influence on the durability of the subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for those who want to paint with LAB Interior Lacquer or LAB Exterior Lacquer on wood, mdf, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, rebated doors, the radiator, door fittings, chipboards with foil (like most IKEA cabinets), plastic sockets or covers and pipes. Are you only going to paint wood? Then we recommend LAB Houtprimer Binnen or LAB Houtprimer Buiten before you start painting.

Consumption: 10 m² per litre. The yield depends on the substrate, pre-treatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount?
Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 liter of LAB Multiprimer for 1 layer. For absorbent surfaces, we always recommend applying two layers. Also assess the coverage. Before you start painting with the topcoat, your work must already be properly opaque in the LAB Multiprimer. If necessary, apply 2 layers of this primer.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Vanilla Comfort no. 149

Vanilla Comfort no. 149 is a beautiful color to let yourself be completely enveloped by. A light sweet, neutral shade due to its rouge undertone. Vanilla Comfort no. 149 looks wonderful with Madonna no. 90 and accents of Silent Cinnamon no. 25 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Satin Grey no. 551

Satin grey with a powdery look. Satin Grey no. 551 is a light medium grey. For those who want to get rid of white and are looking for a subtle colour shade with allure. The deep Harbour no. 968 has the same warm glow over the grey and therefore matches perfectly with Satin Grey no. 551.

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Satin Grey no. 551

Satin grey with a powdery look. Satin Grey no. 551 is a light medium grey. For those who want to get rid of white and are looking for a subtle colour shade with allure. The deep Harbour no. 968 has the same warm glow over the grey and therefore matches perfectly with Satin Grey no. 551.

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Medina no. 573

Medina no. 573 is a loyal, welcoming blue. Like the fresh and vibrant welcome of the walled city after the scorching desert heat. Go for a true Moroccan colour combination with Masala Chai no. 31 and Strong Garlic no. 92 .

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Satin Grey no. 551

Satin grey with a powdery look. Satin Grey no. 551 is a light medium grey. For those who want to get rid of white and are looking for a subtle colour shade with allure. The deep Harbour no. 968 has the same warm glow over the grey and therefore matches perfectly with Satin Grey no. 551.

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soho no. 452

Think urban, trendy, modern. Think Soho no. 452. This dark taupe wouldn't look out of place in luxury penthouses and has a global effect. Soho no. 452's intense timbre pairs beautifully with Brown Wood no. 222 and Soft Pillow no. 264 .

LAB Wallfix

LAB Wallfix is ​​a semi-covering primer with which you can pre-treat powdery and absorbent surfaces such as new plasterwork both indoors and outdoors before you start with, for example, LAB Wallpaint or LAB Chalk (Primer) . You order LAB Wallfix in (an approximation of) the right color, so that by applying the primer you already color the surface and greatly improve the opacity of the subsequent layer of paint.

It is important to read the product advice carefully before application.

Consumption: 6 to 12 m² per litre. The yield is strongly dependent on the (absorption of the) substrate, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1 litre) you need 1.11 litres of LAB Wallfix for 1 layer (calculated with a consumption of 9 m² per litre).

For a very absorbent or powdery surface we recommend LAB Wallfix in two layers. In general, this is not necessary, especially indoors.

LAB Wallfix is ​​a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Wallfix, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soho no. 452

Think urban, trendy, modern. Think Soho no. 452. This dark taupe wouldn't look out of place in luxury penthouses and has a global effect. Soho no. 452's intense timbre pairs beautifully with Brown Wood no. 222 and Soft Pillow no. 264 .

LAB Wood Primer Outside

LAB Wood Primer Outside is an extremely suitable primer for wood outside that you want to finish with LAB Outside Paint . It promotes the durability and gloss retention of the subsequent layers. Indispensable for good painting!

It is important to read the product advice carefully before application.

Consumption : 14 m² to 16 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 15 m² = 0.7 litres) you need 0.7 litres of LAB Wood Primer Outside for 1 layer (calculated with a consumption of 15 m²). For untreated wood we always recommend applying two layers.

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Always assess the coverage. Before you start painting with LAB Outdoor Paint, your work must already be well covered in LAB Wood Primer Outdoor. If necessary, apply 2 layers of this primer.

LAB Houtprimer Buiten is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society during the production of our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Buiten, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping from €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Marie no. 114

A deep burgundy with a royal stature. Marie no. 114 is refined because the red goes sublimely with a black timbre. For an exclusive atmosphere. Marie no. 114 and Arabic Desert no. 710 look fantastic in a classic design.

LAB Multiprimer

LAB Multiprimer is a high-quality bonding primer for indoor and outdoor use, suitable for almost any grease-free surface. This durable, matt, water-based primer provides good coverage and is very easy to sand. LAB Multiprimer has a major positive effect on the durability of subsequent layers.

It is important to read the product advice carefully before application!

LAB Multiprimer is the ideal start for anyone who wants to paint with LAB Interior Paint or LAB Exterior Paint on wood, MDF, metal, zinc, aluminum and plastic. Ideal for priming (plastic) doors and frames, flush doors, radiators, door fittings, chipboard with foil (such as most IKEA cabinets), plastic sockets or cover plates and pipes. Are you only going to paint wood? Then we recommend LAB Wood Primer Interior or LAB Wood Primer Exterior before you apply the final coat.

Consumption: 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required quantity?
Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 10 m² = 1 litre) you need 1 litre of LAB Multiprimer for 1 layer. For absorbent surfaces we always recommend applying two layers. Also assess the coverage. Before you start painting with the top coat, your work must already be well covered in the LAB Multiprimer. If necessary, apply 2 layers of this base coat.

LAB Multiprimer is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Multiprimer, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soho no. 452

Think urban, trendy, modern. Think Soho no. 452. This dark taupe wouldn't look out of place in luxury penthouses and has a global effect. Soho no. 452's intense timbre pairs beautifully with Brown Wood no. 222 and Soft Pillow no. 264 .

LAB Wood Primer Interior

LAB Houtprimer Binnen is a high-quality, durable and water-based primer of Dutch origin. Covers well, is low-odor and very easy to sand. This primer ensures good adhesion and has a major positive effect on the durability of subsequent layers. The ideal start for those who want to apply LAB Binnenlak over wood.

Read the product advice before use.

Consumption: 8 m² to 10 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 1 mx 2 m (2 m² : 9 m² = 0.2 litres) you need 0.2 litres of LAB Wood Primer Interior for 1 layer (calculated with a consumption of 9 m².

For untreated wood, we always recommend applying two coats. Also assess the coverage. Before you start painting with the top coat, your work should already be well covered in the LAB Wood Primer Inside. If necessary, apply 2 coats of this primer.

Want to make sure you have everything you need for your painting project? Then choose the complete, reduced-price lacquer paint processing package .

LAB Houtprimer Binnen is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtprimer Binnen, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make (drinking) water available to those who have no or difficult access to it. Together we make the difference!