LAB PAINT

LAB Wood Stain | LIMITED JADE NO. 479

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Limited Jade no. 479

Limited Jade no. 479 is a pleasant muted green colour. Full of subdued refinement. This green has a calming and comforting effect. Nude Cashmere no. 312 and accents of Tout no. 530 look great with Limited Jade no. 479. These colours are contrasting, but fit together very well due to the same greying.

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Denim No. 248

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Denim No. 248

Denim no. 248 is an original alternative to anthracite. This shade of blue is powerful, casual, sturdy, accessible and tough. Works, just like jeans, in any combination! For example, Denim no. 248 goes well with Silence no. 107. Or make it more exciting and original with Nude Cashmere no. 312.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

NEW: LAB Wood Stain | Zen Garden no. 680

LAB PAINT

NEW: LAB Wood Stain | Zen Garden no. 680

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Zen Garden no. 680

Green is good for you. Zen Garden no. 680 too! This blend of ecru, faded black and reseda green creates a natural balance and looks great in a botanical interior. Enhance the natural effect by combining with other greens, such as Zanzibar no. 852 and Crazy Emerald no. 762 .

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | SOFT PILLOW NO. 264

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Soft Pillow no. 264

A muted white with soft beige tones. To relax with. Soft Pillow no. 264 is preferred as a base in an interior with natural grey and brown tones. Dream away together with Vanilla Comfort no. 149 and Petit Macaron no. 916.

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | SMOKING GRASS NO. 23

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Smoking Grass no. 23

Smoking Grass no. 23 is a strongly muted green. Due to its greying, this shade is reassuring and provides relaxation. Gold or brass and weathered wood look beautiful with this colour tone. Combine Smoking Grass no. 23 with AMS Leaves no. 602 and trip on the beautiful interplay of the green shades.

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | SAINT TROPEZ NO. 460

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Saint-Tropez no. 460

Put on your big sunglasses and go for a stroll! You can bring that wonderful feeling into your home if you choose Saint-Tropez no. 460. A colour to subtly show off! The red undertone of Saint-Tropez no. 460 goes very well with the complementary, yet soft greens of Zanzibar no. 852 and Whispering Woods no. 62 .

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | QUIET BLUSH NO. 67

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Quiet Blush no. 67

A fresh white, a nice base. But don't be mistaken for Quiet Blush no. 67. This shade of white has a subtle, warm undertone. Very nice to add a touch of brightness to an interior with mainly warm materials and colours. Intensify the blush of Quiet Blush no. 67 with Petit Macaron no. 916 andArabic Desert no. 710 .

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Pale Gray No. 93

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Pale Gray No. 93

A soft, pale gray. Pale Gray no. 93 is simple and effortlessly chic. Because this is a very light gray, you retain the spatial effect within your interior, but you still play carefully with color. Pale Gray no. 93 only has a little bit of black in it. As a result, this shade of gray is easy to combine with anything.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

NEW: LAB Wood Stain | Oh My Gosh No. 779

LAB PAINT

NEW: LAB Wood Stain | Oh My Gosh No. 779

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Oh My Gosh No. 779

Outrageous pink for the real daredevil. With Oh My Gosh no. 779 you make a bold, playful choice. Show guts and go for this eye-catching, refreshing focus. Create a Scandinavian disco by combining Oh My Gosh no. 779 with Gracious Blue no. 792 and Lotus Lush no. 309.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Mister MT no. 156

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Mister MT no. 156

Mister MT no. 156 is a stubborn, tough color. He easily befriends the blues, teals, and greens. For these colors it really is a shoulder to lean on. This is clearly reflected in the combination with, for example, the green of The Grand no. 325 or the blue of Gracious Blue no. 792.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | MARIE NO. 114

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Marie no. 114

A deep burgundy with a royal stature. Marie no. 114 is refined because the red goes sublimely with a black timbre. For an exclusive atmosphere. Marie no. 114 and Arabic Desert no. 710 look fantastic in a classic design.

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | GRAY CLAY NO. 74

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Grey Clay no. 74

A creamy greige with a warm glow. Combine with natural materials and go for a Japandi interior style with Grey Clay no. 74. The pink undertone of Grey Clay no. 74 comes more to the fore in a composition with Diamond Dust no. 232 and Merlot Mania no. 123 .

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Copperhead No. 29

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Copperhead No. 29

Copperhead no. 29 is an earthy red with the allure of copper. A powerful and charismatic statement for your interior. The color tone works well in old mansions, but also looks great with modern design. Emphasize the earthy character by combining Copperhead no. 29 with rattan and coarse weaves or look for contrast with The Grand no. 325.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Black Clay No. 40

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 11:59 PM = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Black Clay No. 40

Black Clay No. 40 may appear black at first glance, but it isn't! It is a concentrated, confident anthracite. For those looking for a more natural black. Black Clay no. 40 is a black shade that fits flawlessly in a stylish, elegant and chic interior. Good to combine with natural materials or color tones.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

LAB Wood Stain | AVOCADO CLUB NO. 840

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Avocado Club no. 840

Avocado Club no. 840 is an almost black green. Excessively pigmented. For the daring. Are you joining the club? Lighten Avocado Club no. 840 with Mineral Chic no. 728 and give it some extra punch with Racing Riksja no. 54 .

LAB Wood Stain

LAB Wood Stain (covering) is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB Wood Stain | SHOCKING CORAL NO. 77 | LAB ARCHIVE COLORS

LAB PAINT

LAB Wood Stain | SHOCKING CORAL NO. 77 | LAB ARCHIVE COLORS

€68.00

✓ Free standard shipping on orders over €50.
✓ Ordered before 23:59 = delivered the next working day.
✓ Rather Same Day Delivery ?
✓ Specially mixed for you.
✓ Pick up in Bussum (Mon to Sat).

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Shocking Coral no. 77 | LAB ARCHIVE COLORS

LAB PAINT is a sustainable paint line, developed and produced in the Netherlands. The LAB PAINT label includes a unique color collection and each color has its own story! The LAB ARCHIVE COLOURS are colors from our old collection, the 40 ml sample pots and color samples are not available.

LAB Wood Stain

LAB Wood Stain is specially developed for use on (non-dimensionally stable) wooden facade cladding and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required quantity? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide this by the consumption per litre. Now you know how many litres you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litres) you need 0.8 litres of LAB Wood Stain for 1 layer (calculated with a consumption of 12 m² per litre).

A good pre-treatment prevents most problems. The surface to be treated must always be strong, dry and free of dust and grease. Read the product advice for more information about the right pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Houtbeits is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. We pay a lot of attention to people, the environment and society when producing our paint line. And we are always looking for ways to do even better. If you buy LAB Houtbeits, you automatically support the LAB PAINT FOUNDATION . The goal of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Zuzu no. 578

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Zuzu no. 578

Zuzu no. 578 is anthracite, almost black, with no other undertone. The ultimate dark color! The name Zuzu is borrowed from the Himbas from Namibia, who give dark colors this beautiful name. Zuzu no. 578 is ideal for a large, dark contrast with many lighter shades, such as Pale Gray no. 93 and Rocky no. 169 . But it is also a nice combination with color shades with a gray base, such as The Grand no. 325 and Zanzibar no. 852 .

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

LAB PAINT

NEW: LAB Wood Stain | Zanzibar no. 852

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Zanzibar no. 852

Some greens almost fall under the neutrals. Zanzibar no. 852 is a good example of this. It's a journey in paradise. From swaying palm trees, pearly white beaches and sunsets to the idyllic green interior. Zanzibar no. 852 fits nicely in a palette with Magnum no. 708 and Dark Taupe no. 196 , but also harmonises with The Grand no. 325 and Hero's Time no. 138 .

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

NEW: LAB Wood Stain | White Wood No. 201

LAB PAINT

NEW: LAB Wood Stain | White Wood No. 201

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

White Wood No. 201

White Wood no. 201 is a subtle natural shade. This white with a hint of gray creates a light base with a soothing effect. Beautiful in combination with wood! Unite with other light grays such as Mineral Chic no. 728 and Stone no. 28 for a serene Scandinavian style.

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!

NEW: LAB Wood Stain | Vanilla Comfort no. 149

LAB PAINT

NEW: LAB Wood Stain | Vanilla Comfort no. 149

€68.00

✓ Free standard shipping from € 50,-
✓ Ordered before 23:59 = delivered the next working day
✓ Rather Same Day Delivery ?*
✓ Mostly available from stock
✓ Pick up in Bussum (Mon to Sat)

Please note: screen colors may differ from the actual paint colors depending on screen settings. The incidence of light can also largely determine a color on the wall and the atmosphere in the room.

Vanilla Comfort no. 149

Vanilla Comfort no. 149 is a beautiful color to completely envelop you. A slightly sweet, neutral shade due to its rouge undertone. Vanilla Comfort no. 149 looks wonderful with Madonna no. 90 and accents of Silent Cinnamon no. 25 .

LAB Wood Stain

LAB Houtbeits has been specially developed for use on (non-dimensionally stable) wooden facade paneling and garden wood. The wood structure remains visible with this durable stain and is accentuated, depending on the type of wood.

It is important to read the product advice carefully before application.

Consumption : 11 to 14 m² per litre.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this together and then divide by the consumption per litre. Now you know how many liters you need for 1 layer. For example: with a surface of 5 mx 2 m (10 m² : 12 m² = 0.8 litre) you need 0.8 liter LAB Wood stain (calculated with a consumption of 12 m² per litre) for 1 layer.

Proper pre-treatment prevents most problems. The surface to be treated must always be load-bearing, dry and free of dust and grease. Read the product advice for more information about the correct pre-treatment. Apply LAB Wood Stain in 2 layers for an optimal and durable result.

LAB Wood Stain is a product of LAB PAINT. This high-quality and sustainable paint label is developed and produced in the Netherlands. In the production of our paint line, we pay a lot of attention to people, the environment and society. And we are always looking for ways to do it even better. If you buy LAB Wood Stain, you automatically support the LAB PAINT FOUNDATION . The aim of this foundation is to make clean (drinking) water available to those who have no or difficult access to it. Together we make the difference!